TROUBLESHOOTING GUIDE

PROBLEM

 

PROBABLE CAUSE

 

CORRECTIVE ACTION

 

 

 

 

Starter Will Not

1. Battery dead.

1.

Service battery.

Crank Engine

2. Blown fuse.

2.

Replace fuse.

 

3.

Electrical connections loose or corroded.

3.

Clean and check connections for good contact.

 

4.

Defective ignition switch.

4.

Contact authorized SNAPPER dealer.

 

 

 

 

 

 

5.

Starter Spins without engaging.

5.

Release Start key and repeat attempt. If starter

 

 

 

 

continues to spin contact Engine Dealer.

Engine Will Not

1. Blade engagement switch in the “ON” position.

1. Move blade engagement switch to “OFF”.

Start

2. Park brake not set.

2.

Set park brake.

 

3.

Fuel tank empty.

3.

Fill fuel tank with fresh fuel.

 

4.

Engine needs choking.

4.

Move engine speed control to “CHOKE”.

 

5.

Spark plug wire disconnected.

5.

Place spark plug wire onto spark plug.

 

6.

Battery weak or dead.

6.

Service battery.

 

7.

Faulty interlock switch.

7.

Contact authorized SNAPPER dealer.

Engine Stalls After

1. Operator not in seat.

1.

Sit in operator’s seat.

Running

2. Engine speed control in the “CHOKE” position.

2. Moveengine speed control to “FAST”.

 

3.

Fuel tank empty.

3.

Fill with fuel to proper level.

 

4. Engine air pre-cleaner and or air cleaner dirty.

4.

Clean free of all debris.

 

5.

Spark plug defective or gap set improperly.

5.

Service spark plug.

 

6.

Fuel filter stopped up.

6.

Replace fuel filter.

 

7.

Water, debris or stale fuel in fuel system.

7.

Drain and clean fuel system.

Engine Loses

1. Excessive load on engine.

1.

Lessen load by slowing ground speed.

Power

2. Engine air pre-cleaner or air cleaner dirty.

2.

Clean or replace filters.

 

3.

Engine oil level low.

3.

Fill with engine oil to proper level.

 

4.

Engine cooling fins and air screens

4.

Clean free of all debris.

 

excessively dirty.

 

 

 

5.

Spark plug faulty.

5.

Service spark plug.

 

6.

Water, debris or stale fuel in fuel system.

6.

Drain and clean fuel system.

Engine Backfires

1. Engine speed control set too “FAST”.

1. Set engine speed control to “SLOW” and allow

When Turned To

 

 

engine to idle. Then, turn key to “OFF”.

“STOP”

 

 

 

 

Excessive

1. Damaged or bent mower blades.

1.

Service mower blade(s).

Vibration

2. Loose blade components.

2.

Service and tighten loose parts.

 

3.

Loose or missing air lift (if equipped).

3.

Replace air lifts. Tighten to proper torque.

(Continued on Next Page)

35

Page 35
Image 35
Snapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2 Troubleshooting Guide

LT160H48GBV, LT160H42GBV2, LT180H48GBV2, WLT160H42GBV, WLT180H48GBV2, LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2 specifications

The Snapper LT160H42GBV and its related models, including LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, and WLT180H48GBV2, are part of Snapper's renowned lineup of riding lawn mowers. These machines are designed for both residential and commercial users, delivering remarkable performance, efficiency, and versatility.

One of the key features of the Snapper LT series is the powerful engine. Most models are equipped with reliable Kohler or Briggs & Stratton engines, providing exceptional cutting power and durability. With a cutting deck range of 42 to 48 inches, the LT series allows users to tackle various lawn sizes and types with ease, ensuring a smooth and efficient mowing experience.

Another standout characteristic is the easy-to-use Gear-Driven Transmission system. This feature enables users to shift effortlessly between forward and reverse speeds, enhancing maneuverability around obstacles and tight spaces. Furthermore, the adjustable cutting height settings allow for a customized mowing experience, letting users choose their preferred grass height from a convenient range of settings.

The Snapper LT series also emphasizes comfort and ergonomics. The plush high-back seats provide ample cushioning, allowing users to mow for extended periods without discomfort. The large, easy-grip steering wheel enhances control, while the spacious footwell accommodates a variety of user sizes.

In terms of technology, the LT160H42GBV and its counterparts feature Snapper’s innovative SmartCharger technology that ensures the battery is always charged and ready to go. This is particularly useful for those who may not use their mower frequently, ensuring reliability every time you start the engine.

Safety is also a priority with these models. They come equipped with safety features such as operator presence control, which ensures that the mower will only operate when the driver is seated, preventing accidental starts.

In conclusion, the Snapper LT160H42GBV and its variants stand out for their robust engine performance, user-friendly controls, and comfort-oriented design. With modern technologies like SmartCharger and an array of safety features, these riding mowers provide an ideal solution for maintaining your lawn efficiently and effectively. Whether for home use or professional landscaping, the Snapper LT series delivers quality and reliability that users can trust.