Section 4 – ADJUSTMENT & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

4.2.4.MOWER DECK ADJUSTMENT (LEVELNESS) FRONT-To-REAR (42” Decks)

1.Remove hair pins and washers securing sector plates to rear lift arms. See Figure 4.3.

SECTOR PLATES

HIGHEST DECK

 

LOWEST DECK

SETTING

 

SETTING

 

 

 

 

 

 

REMOVE HAIR PIN & WASHER

FIGURE 4.3

2.Move sector plate as required to raise or lower the rear of deck.

NOTE: The deck should be set so that the rear of the deck is 1/4” lower than the front.

3.If the sector plates are in their lowest setting and proper level cannot be obtained, adjust the front lift rod as follows:

4.Move deck lift lever to #5 position.

5.Place a 2 x 4 wooden block on edge under front center of deck.

6.Place a 3 x 3 wooden block under rear center of deck.

7.Remove hair pins and washers securing sector plates. Lower rear of deck onto 3 x 3 block.

8.Remove hair pin and washer securing front lift cable to front lift arm. See Figure 4.4.

 

CLEVIS

HAIR PIN

PIN

WASHER

 

JAM NUT

FRONT LIFT CABLE

FRONT LIFT ROD

HANGER

FRONT LIFT ROD

FIGURE 4.4

9.Remove front lift cable and rest front of deck onto

2x 4 block.

10.Loosen jam nut on front lift cable. See Figure 4.4.

11.Rotate front lift cable until it can be reinstalled into front lift arm without lifting deck.

12.Secure lift cable to lift arm with washer and hair pin. Secure jam nut.

13.Reinstall sector plates onto rear hanger brackets and secure with washers and hair pins.

14.Raise deck and remove wooden blocks.

15.Repeat steps for front to rear level until levelness is acquired.

17

Page 16 Page 18
Page 17
Image 17
Snapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2 important safety instructions Clevis
Page 16 Page 18

LT160H48GBV, LT160H42GBV2, LT180H48GBV2, WLT160H42GBV, WLT180H48GBV2, LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2 specifications

The Snapper LT160H42GBV and its related models, including LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, and WLT180H48GBV2, are part of Snapper's renowned lineup of riding lawn mowers. These machines are designed for both residential and commercial users, delivering remarkable performance, efficiency, and versatility.

One of the key features of the Snapper LT series is the powerful engine. Most models are equipped with reliable Kohler or Briggs & Stratton engines, providing exceptional cutting power and durability. With a cutting deck range of 42 to 48 inches, the LT series allows users to tackle various lawn sizes and types with ease, ensuring a smooth and efficient mowing experience.

Another standout characteristic is the easy-to-use Gear-Driven Transmission system. This feature enables users to shift effortlessly between forward and reverse speeds, enhancing maneuverability around obstacles and tight spaces. Furthermore, the adjustable cutting height settings allow for a customized mowing experience, letting users choose their preferred grass height from a convenient range of settings.

The Snapper LT series also emphasizes comfort and ergonomics. The plush high-back seats provide ample cushioning, allowing users to mow for extended periods without discomfort. The large, easy-grip steering wheel enhances control, while the spacious footwell accommodates a variety of user sizes.

In terms of technology, the LT160H42GBV and its counterparts feature Snapper’s innovative SmartCharger technology that ensures the battery is always charged and ready to go. This is particularly useful for those who may not use their mower frequently, ensuring reliability every time you start the engine.

Safety is also a priority with these models. They come equipped with safety features such as operator presence control, which ensures that the mower will only operate when the driver is seated, preventing accidental starts.

In conclusion, the Snapper LT160H42GBV and its variants stand out for their robust engine performance, user-friendly controls, and comfort-oriented design. With modern technologies like SmartCharger and an array of safety features, these riding mowers provide an ideal solution for maintaining your lawn efficiently and effectively. Whether for home use or professional landscaping, the Snapper LT series delivers quality and reliability that users can trust.
Top Page Image Contents