Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECKLIST

Make the following checks and perform service as required before each start-up.

2.1.1.Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires.

2.1.2.Check guards, deflectors and covers to make sure all are in place and securely tightened. If guards are missing or damaged, replace BEFORE using mower.

2.1.3.Check engine oil and add oil as needed to bring level up to, but not over, the FULL mark. Refer to engine owner’s manual for oil specifications. See Figure 2.1.

SAFE

LEVEL

AREA

FIGURE 2.1

2.1.4.Check blade switch to ensure it moves freely. Manually pull switch out to the “ON” position and push switch down to the “OFF” position.

2.1.5.Clean exterior surfaces of cutting deck, engine and tractor of any accumulation of dirt, grass, oil, etc. Keep engine air intake screens and cooling fins clean at all times.

2.1.6.With engine “OFF” move the tractor outside and add fuel to the fuel tank. Securely tighten fuel cap after refueling. Refer to engine owner’s manual for fuel specifications. See Figure 2.2.

2.1.7.Check Reverse Lockout Mechanism. Refer to Section “Reverse Lockout Mechanism”.

FUEL TANK

TIGHTEN CAP

AFTER

FILLING TANK

FIGURE 2.2

2.2 OPERATOR’S SEAT ADJUSTMENT

2.2.1.FRONT TO REAR ADJUSTMENT

1.With the engine "OFF", raise operator's seat and loosen the two adjusting knobs on the seat support. Lower the seat. Sit in the operator's seat and slide the seat forward or backward until the clutch/brake pedal can be fully depressed comfortably. Raise seat and tighten the adjusting knobs to secure seat in position. See Figure 2.3.

LOOSEN ADJUSTING

KNOBS TO ADJUST

SEAT

FIGURE 2.3

6

Page 5 Page 7
Page 6
Image 6
Snapper LT160H48GBV, LT160H42GBV2, LT180H48GBV2, WLT160H42GBV, WLT180H48GBV2 PRE-START Checklist
Page 5 Page 7

LT160H48GBV, LT160H42GBV2, LT180H48GBV2, WLT160H42GBV, WLT180H48GBV2, LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2 specifications

The Snapper LT160H42GBV and its related models, including LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, and WLT180H48GBV2, are part of Snapper's renowned lineup of riding lawn mowers. These machines are designed for both residential and commercial users, delivering remarkable performance, efficiency, and versatility.

One of the key features of the Snapper LT series is the powerful engine. Most models are equipped with reliable Kohler or Briggs & Stratton engines, providing exceptional cutting power and durability. With a cutting deck range of 42 to 48 inches, the LT series allows users to tackle various lawn sizes and types with ease, ensuring a smooth and efficient mowing experience.

Another standout characteristic is the easy-to-use Gear-Driven Transmission system. This feature enables users to shift effortlessly between forward and reverse speeds, enhancing maneuverability around obstacles and tight spaces. Furthermore, the adjustable cutting height settings allow for a customized mowing experience, letting users choose their preferred grass height from a convenient range of settings.

The Snapper LT series also emphasizes comfort and ergonomics. The plush high-back seats provide ample cushioning, allowing users to mow for extended periods without discomfort. The large, easy-grip steering wheel enhances control, while the spacious footwell accommodates a variety of user sizes.

In terms of technology, the LT160H42GBV and its counterparts feature Snapper’s innovative SmartCharger technology that ensures the battery is always charged and ready to go. This is particularly useful for those who may not use their mower frequently, ensuring reliability every time you start the engine.

Safety is also a priority with these models. They come equipped with safety features such as operator presence control, which ensures that the mower will only operate when the driver is seated, preventing accidental starts.

In conclusion, the Snapper LT160H42GBV and its variants stand out for their robust engine performance, user-friendly controls, and comfort-oriented design. With modern technologies like SmartCharger and an array of safety features, these riding mowers provide an ideal solution for maintaining your lawn efficiently and effectively. Whether for home use or professional landscaping, the Snapper LT series delivers quality and reliability that users can trust.
Top Page Image Contents