NEC 241716 To Cancel Location Information, To select the Cancel Cn, Invalid Code = LSI does not

Location Status Information - User Guide

To Cancel Location Information

When you want to cancel the information you have recorded on your phone, press the Dterm function key assigned to LSI and follow the procedure below:

The LCD	What you do:	When an error message
displays:		is displayed:
Set–1 Vw–2 Cn–3	To select the Cancel (Cn)	Invalid Option=An entry, other
	function, on the Dterm keypad:	than 1, 2, 3, or an extension or
	Enter “3” and then “#”.	number to call, has been made.
		Enter “#” and try again, or press
		the LSI key to end the session.
Enter Extension	Enter the extension number of the	Invalid Extn=An extension that is
	Dterm to which the location	not in the LSI database has been
	information applies, and then “#”.	entered at the keypad. Enter “#” to
		display the prompt again or press
		the LSI key to end the session.
Enter Code	Enter your personal access code	Invalid Code=LSI does not
	and then “#”.	recognize the entered code. Enter
		“#” to display the prompt again, or
	If more than one employee is	press the LSI key to end the
	assigned to the extension just	session.
	entered, this code is used to
	determine which employee is
	using the application.
Msg Cancelled	No action is required. The preset
	location data is cancelled.

Page 6 NDA-30044 Revision 2.0