Redial Your Last Number, Speed Dial Keys

NCS Feature Telephone

Turn Off Your Telephone’s Mic So Your Caller Can’t Hear Your Voice. . .

Disable the Handset Microphone and/or the Speakerphone:

1. While on a call, press MUTE.

The caller will not hear your voice and the MUTE key will light to show that the feature is activated.

To deactivate, press MUTE again.

Redial Your Last Number . . .

To Automatically Redial the Last Number that was Manually Dialed:

1.Lift the handset.

2.Press REDIAL.

The last number dialed called.

Speed Dial Keys . . .

The NCS Feature Phone has 20 one-touch speed dial bins that are used for dialing fre- quently used numbers. Each speed dial bin can store up to 15 digits. There are 10 speed dial keys plus a MEMORY SHIFT key which allows access to the 10 additional speed dial numbers. The MEMORY SHIFT key is used to select the “A” or “B” locations for each speed dial key. The LED indicator shows if the “A” or “B” location is selected. The “A” locations are reprogrammed for commonly used features. Refer to page 7 for details on using those keys.

Program a Speed Dial Bin:

1.With the handset off-hook, verify the status of the

MEMORY SHIFT key.

For programming the “A” locations, the LED indica- tor must be off. For “B” locations, the LED must be on.

2.Press STORE.

STORE is located under the index card on the front panel.

3.Using the telephone’s dial pad, dial the digits to be stored.

The entry should include any numbers required for

line access and any long distance access numbers (9 + 1 + area code). In addition, the PAUSE or FLASH keys can also be entered as part of the stored number if needed.

4.Press the key where the speed dial should be stored. To program additional numbers, repeat steps 1-4.

Verify/Check a Speed Dial Bin:

1.With the telephone on-hook, press STORE twice until “CHECK” is displayed on the LCD.

2.Press the speed dial key which is to be checked.

The programmed entry will be displayed.

3.Exit the verification mode by pressing STORE until the display returns to its normal/idle display.

- 6 -

- 3 -