Roamer User Guide
Relocating Temporarily from a Permanently Assigned Telephone
Use this procedure if you have a home telephone number assigned to you, but you want to temporarily make and receive calls on a different telephone.
Press the Roamer function key on the selected telephone to display the first message:
Displayed Message | Expected Response | Result |
1. “YOUR ID?” | Enter your ID number | One of the following occurs: |
| followed by a #. | • Your number is reassigned |
|
| |
| Note: If the ID you en- | to the telephone from which |
| you are calling. The light | |
| tered is not valid, | |
| beside the Roamer function | |
| the message “IN- | |
| key on your home | |
| VALID ID” dis- | |
| telephone begins to flash. | |
| plays. Press # and | |
| (2a) | |
| begin again. | |
|
| • Roamer recognizes you as |
|
| being already relocated to |
|
| this telephone. (2b) |
|
|
|
2a. “LOCATION SET” | Press #. | This is now temporarily your |
|
| telephone. Your incoming calls |
|
| will come to it, and you can |
|
| make outgoing calls from it |
|
| according to your own |
|
| privileges and restrictions. |
|
| While you are away from your |
|
| home telephone, the Roamer |
|
| function key on it flashes. |
|
|
|
2b. “STILL HERE” | Press #. | Your privilege level is |
|
| confirmed on this telephone. |
Note: If you want to exit from Roamer, press the Roamer function key a second time.
Page 3 |