MH120 Wireless Telephone |
Using Call Waiting
If you are on a call and hear subdued ringing, a call is coming in on a second line. The line number on the display may be flashing. To answer this call:
Step 1 Press the Hold key to put your first call on hold.
Step 2 Press the LINE key and the line number of the second call at the same time.
Table
Table
Features
Headset Answer
Hanging Up
Changing Volume
Silencing while Ringing
Backlight
Actions
When a headset is plugged into the Wireless Telephone, any key other than the Power On/Start Call, Power Off/End Call, softkeys or side buttons may be pressed to answer a call.
At the end of each call, press the Power Off/End Call key. Be sure to do this at the end of each call.
You may increase or decrease the volume of the speaker by pressing the corresponding Up and Down buttons located on the left side of the Wireless Telephone.
If the ringing of the Wireless Telephone is not desired, you may silence the ring by pressing the Power Off/End Call button. This action does not interrupt the call and the caller may leave a voicemail message.
The backlight comes on when any key is pressed or when there is an incoming call and stays on for 10 seconds. It turns off after 10 seconds if another key is not pressed within that period.
Activating System Features
The features that have been programmed in your system may be viewed and activated through the Shortcut menu and Softkey Functions.
Table
Mobile Handset 120 and Desktop Charger/Gang Charger User Guide - Revision 1