Minolta 800si instruction manual Handling the Camera, Diopter Adjustment, Holding the Camera

Page 11

HANDLING THE CAMERA

HOLDING THE CAMERA

Hold the camera grip firmly with your right hand while supporting the lens with your left hand. Keep your elbows at your side and your feet shoulder-width apart to hold the camera steady. Always keep the camera strap around your neck or wrist in the event you accidentally drop the camera.

Do not touch the focusing ring of an AF lens or the end of the lens barrel of an xi-Series Autozoom lens.

Do not block the AF illuminator when autofocus is in use.

Use a tripod when shooting with long shutter speeds or a telephoto lens.

PRESSING THE SHUTTER RELEASE BUTTON

Press the shutter-release button partway down to activate the camera's autofocus and autoexposure systems. Gently press the shutter-release button all-the-way down to take the picture - never use a quick jab.

DIOPTER ADJUSTMENT

If you are near or far sighted, use the diopter adjustment to adjust the eyepiece for your eyesight. The diopter adjustment range is from -2.5 to + 0.5 diopters.

Slide the main switch to on.

Look through the viewfinder and turn the diopter-adjustment dial until the focus frame outlines appear the sharpest.

• If the focus frame does not appear, press the shutter-release button partway down.

• Turn the dial in the + direction if you are farsighted. Turn the dial in the – direction if you are nearsighted.

If additional correction is needed, a Minolta Eyepiece Corrector can be attached to the camera's eyepiece.

The diopter adjustment dial is easier to turn if the eyepiece cup is removed.

18

19

Image 11
Contents Page For Proper and Safe USE Table of Contents Control Panel Names of PartsBody Viewfinder Names of PartsData Panel Quick Operation Neckstrap Standard AccessoriesEyepiece and Accessory Shoe Caps Basic OperationLow-battery symbol Installing the BatteriesBattery Condition Indicators Full-battery symbolRemoving the Lens Attaching and Removing the LensAttaching the Lens Remove the camera body cap and the rear lens cap as shownLoading Film Close the back cover and slide the main switch to onHolding the Camera Diopter AdjustmentSlide the main switch to on Handling the CameraGrip sensor Slide the eye-start switch to on or to OFFCustomize Function #15 Eye-start Switch EYE-STARTTurn the camera on Press the program-reset button Shooting in FULL-AUTO ModePress the rewind button Focus BasicsRewinding the Film Manual RewindLocking Focus with the SHUTTER-RELEASE Button Focus SignalsFocus Lock Customized Function #9 AF-Area Selection Focus LockLocking Focus with the AF Button Center your subject Focus area Press and hold the AF buttonManual Focus Special Focusing SituationsAF Illuminator Flash BasicsCustomized Function #5 Flash Control in P-Mode Using the BUILT-IN FlashFlash Signals Customized Function #16 Built-in Flash Zoom Flash RangeLens Shadowing and the BUILT-IN Flash Fill Flash RED-EYE ReductionSubject Program Selection Subject Program ModesLandscape Mode Portrait ModeSports Mode CLOSE-UP ModePhotographing Night Scenes Night Portrait ModeExposure Modes Exposure BasicsShutter Speed Program Exposure ModeChanging the Exposure Mode Exposure ModesCancelling PA or PS Mode Aperture Priority ModeProgram Exposure Mode Aperture Control Aperture Priority ModeMode Flash Shutter Priority Mode Shutter Control Manual ModeShutter Priority Mode Meter Index Manual ModeBulb Advanced AutofocusSINGLE-SHOT Autofocus Automatic Autofocus ModeAutofocus Modes Continuous AutofocusWide Focus Area Changing the Autofocus ModeFocus Frame Autofocus ModesLocal Focus Area Press and hold the adjust button and press the ISO buttonRelease Priority Focus FrameSegment HONEYCOMB-PATTERN Metering Advanced ExposureMetering Press the metering-mode button in the control panel CENTER-WEIGHTED Average MeteringMetering Selecting a Metering MethodAE Lock Exposure CompensationCustomize Function #10 AE Lock Button Exposure BracketingAE Lock Customized Function #11 Exposure Bracketing Sequence Raise the built in flash or turn the accessory flash onFlash Bracketing Exposure BracketingRepeat steps 3 and 4 until the series is complete Multiple ExposureFlash Bracketing Repeat until all the exposures have been made Cancelling Multiple ExposureMultiple Exposure Display Pointer Mode Camera StatusMetering Index HIGH-SPEED Flash Sync Attach the 5400HS flash and set it to standard modeAdvanced Flash Press the flash-mode button in the control panel SLOW-SHUTTER Sync REAR-FLASH SyncREAR-FLASH Sync Flash CompensationSetting WIRELESS/REMOTE Flash Mode WIRELESS/REMOTE OFF-CAMERA FlashWait for both flash units to become fully-charged WIRELESS/REMOTE OFF-CAMERA FlashTaking Pictures in WIRELESS/REMOTE Flash Mode PC Terminal WIRELESS/REMOTE Ratio FlashCancelling the WIRELESS/REMOTE Flash Memory Additional FeaturesMemory Storing Settings in MemoryRecalling Camera Settings in Memory Custom Function Control Customized SettingsSetting Action Resetting ALL the Customized Settings to Customized SettingsChanging the Customized Settings Turn the rear dial to change the settingOverwriting the Film Areas Data MemoryFilm Areas Confirming the Data Area Press the adjust buttonData Memory Selecting Data MemoryPress the data-memory button again Turn the front control dial to change framesDeleting ALL of the Stored Data For Owners of the Quartz Date Model Setting the Date and TimePress the Mode button to choose the data imprinting format Replacing the Quartz Data Back BatteryDEPTH-OF-FIELD Preview Setting Film Speed ManuallySetting Film Speed Manually SELF-TIMERFilm Drive Modes AppendixCompatibility of Lenses and Accessories Program Reset ButtonAccessory Information Function Program SettingPanorama Adapter TroubleshootingBlinking Indicators Vertical Control Grip VC-700Problem Check the following TroubleshootingCare and Storage CleaningExposure Technical DetailsCare and Storage FocusTechnical Details 132 133 13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541, Japan