Minolta 800si instruction manual Focus Lock, Locking Focus with the AF Button

Page 16

FOCUS LOCK

LOCKING FOCUS WITH THE AF BUTTON

Center your subject in the

focus area

.

Press and hold the AF button.

• The camera will focus on the subject, then lock focus. When focus is locked, will appear in the viewfinder.

• A local focus area indicator appears in the viewfinder to show where the camera is focusing on the subject.

Choose a different area by turning the front control dial (p 68).

Recompose the scene while continuing to hold the AF button, then press the shutter- release button all the way down.

• Focus will remain locked as long as your finger depresses the AF button.

Make sure your finger has lifted completely off the AF button before taking another photograph if you want the camera to re-focus.

If the camera is set to 14-segment honeycomb metering, exposure is also locked.

When Automatic Autofocus is selected, focus may not be able to lock in some situations. In such cases, set the camera to Single-shot Autofocus (p 65).

The camera cannot lock focus when in Continuous Autofocus mode or if the subject is moving.

With an xi-series lens, autofocus can be locked by pulling the lens control ring toward the camera. Focus can also be locked with some manual zoom lenses by pressing their focus-hold button.

It is possible to change between wide-focus area and local-focus area. Turn the front dial while pressing the AF button. See page 67.

Customized Function #9 - AF-Area Selection

The function of the AF button can be changed.

Setting 1 - Normal. Pressing the AF button changes wide-focus frame to local focus area selection (p 102).

Setting 2 - While the AF button is pressed, the center local-focus area is active.

28

29

Image 16
Contents Page For Proper and Safe USE Table of Contents Body Names of PartsControl Panel Data Panel Names of PartsViewfinder Quick Operation Standard Accessories Eyepiece and Accessory Shoe CapsBasic Operation NeckstrapInstalling the Batteries Battery Condition IndicatorsFull-battery symbol Low-battery symbolAttaching and Removing the Lens Attaching the LensRemove the camera body cap and the rear lens cap as shown Removing the LensClose the back cover and slide the main switch to on Loading FilmDiopter Adjustment Slide the main switch to onHandling the Camera Holding the CameraSlide the eye-start switch to on or to OFF Customize Function #15 Eye-start SwitchEYE-START Grip sensor Shooting in FULL-AUTO Mode Turn the camera on Press the program-reset buttonFocus Basics Rewinding the FilmManual Rewind Press the rewind buttonFocus Lock Focus SignalsLocking Focus with the SHUTTER-RELEASE Button Focus Lock Locking Focus with the AF ButtonCenter your subject Focus area Press and hold the AF button Customized Function #9 AF-Area SelectionSpecial Focusing Situations Manual FocusFlash Basics AF IlluminatorFlash Signals Using the BUILT-IN FlashCustomized Function #5 Flash Control in P-Mode Lens Shadowing and the BUILT-IN Flash Flash RangeCustomized Function #16 Built-in Flash Zoom RED-EYE Reduction Fill FlashSubject Program Modes Subject Program SelectionPortrait Mode Landscape ModeCLOSE-UP Mode Sports ModeNight Portrait Mode Photographing Night ScenesExposure Basics Exposure ModesProgram Exposure Mode Changing the Exposure ModeExposure Modes Shutter SpeedProgram Exposure Mode Aperture Priority ModeCancelling PA or PS Mode Mode Flash Aperture Priority ModeAperture Control Shutter Priority Mode Shutter Priority Mode Manual ModeShutter Control Manual Mode Meter IndexAdvanced Autofocus BulbAutomatic Autofocus Mode Autofocus ModesContinuous Autofocus SINGLE-SHOT AutofocusChanging the Autofocus Mode Focus FrameAutofocus Modes Wide Focus AreaPress and hold the adjust button and press the ISO button Release PriorityFocus Frame Local Focus AreaMetering Advanced ExposureSegment HONEYCOMB-PATTERN Metering CENTER-WEIGHTED Average Metering MeteringSelecting a Metering Method Press the metering-mode button in the control panelExposure Compensation AE LockAE Lock Exposure BracketingCustomize Function #10 AE Lock Button Raise the built in flash or turn the accessory flash on Flash BracketingExposure Bracketing Customized Function #11 Exposure Bracketing SequenceFlash Bracketing Multiple ExposureRepeat steps 3 and 4 until the series is complete Multiple Exposure Cancelling Multiple ExposureRepeat until all the exposures have been made Metering Index Mode Camera StatusDisplay Pointer Advanced Flash Attach the 5400HS flash and set it to standard modeHIGH-SPEED Flash Sync SLOW-SHUTTER Sync REAR-FLASH Sync Press the flash-mode button in the control panelFlash Compensation REAR-FLASH SyncWIRELESS/REMOTE OFF-CAMERA Flash Setting WIRELESS/REMOTE Flash ModeTaking Pictures in WIRELESS/REMOTE Flash Mode WIRELESS/REMOTE OFF-CAMERA FlashWait for both flash units to become fully-charged Cancelling the WIRELESS/REMOTE Flash WIRELESS/REMOTE Ratio FlashPC Terminal Additional Features MemoryRecalling Camera Settings in Memory Storing Settings in MemoryMemory Setting Action Customized SettingsCustom Function Control Customized Settings Changing the Customized SettingsTurn the rear dial to change the setting Resetting ALL the Customized Settings toFilm Areas Data MemoryOverwriting the Film Areas Press the adjust button Data MemorySelecting Data Memory Confirming the Data AreaDeleting ALL of the Stored Data Turn the front control dial to change framesPress the data-memory button again Setting the Date and Time Press the Mode button to choose the data imprinting formatReplacing the Quartz Data Back Battery For Owners of the Quartz Date ModelSetting Film Speed Manually DEPTH-OF-FIELD PreviewSELF-TIMER Setting Film Speed ManuallyAppendix Film Drive ModesProgram Reset Button Accessory InformationFunction Program Setting Compatibility of Lenses and AccessoriesTroubleshooting Blinking IndicatorsVertical Control Grip VC-700 Panorama AdapterTroubleshooting Problem Check the followingCleaning Care and StorageTechnical Details Care and StorageFocus ExposureTechnical Details 132 133 13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541, Japan