Panasonic EB-X100 Making a Call, Entering numbers, Ending a call, Emergency calls

Making a Call

Before making a call, ensure that the phone is switched on, the signal strength meter shows network coverage is available in the current area, and the battery has sufficient charge.

While on a call, the duration will be displayed and auto-reset every 4 hours.

Entering numbers

You need to have the area code and the phone number before you call.

In idle screen

1.Enter the area code and phone number with

#– ,

2.The entered number is displayed

3.Press C(Send)

Ending a call

When you end a call, the duration of the call will be displayed. If Max Cost (see “Max cost” on page 33) is set, the remaining units will also be displayed. While on a call

1.Press D(Power/End)

2.Duration is displayed (when the counter reaches 04:16:00, it will be reset)

3.Max Cost is displayed (when set)

Emergency calls

In an emergency, you can make an emergency call by dialling the international emergency number 112 which is adopted by most countries. Even when SIM is not attached in the phone, this function is available in most cases (F).

In idle screen

1.Enter 112 with #– ,

2.Press C(Send)

Note: Making emergency calls without a SIM is country or network operator dependent.

Basic Operation 9