Closing the Housing, Lubricants, Turn Camera On

even gap all 4 sides

o-ring

housing back

o-ring

housing back

Closing the Housing

1. Place housing face down in your lap or on flat surface.

2. Check to see that there is an o-ring on the housing back and that it is clean and in its proper

location.

3. Guide the back onto the housing.

The o-ring should touch the housing all the way around. There should be an even gap all the way around between the housing and the housing back.

4. Lift the lid snaps so they are extended and place the lid snap into the hook on the housing back.

5. To close the housing push

down on the lid snaps until they snap into place . Lid

snaps on opposite sides of the housing should be closed at the same time. Be sure they are down far enough to engage the lock.

Double check - Once the housing is closed, check the o-ring seal. Check the gap between the housing back and the housing, it should be even all the way around.

Look through the clear plastic back at the o-ring. You should see a darkened area where the o-ring is compressed against the housing back. If you do not see an even black compression seal all the way around the back, open the lid snaps, reseat the housing back and close the lid snaps. Visually check the seal again.

Lubricants

1. Ikelite provides silicone lubricant with the housing. We recommend you use only Ikelite lubricant on Ikelite products as some other brands may cause the o-ring to swell and not seal properly.

2. Use only enough lubricant to lightly cover control shafts and o-rings. Wipe off any excess lubricant with a clean cloth. Lubricant is not a sealant, it is used to reduce friction. Excessive lubricant can collect sand and dirt which may interfere with proper sealing.

CAUTION

Never use spray lubricants as the propellant ingredient can cause the plastic housing to crack.

Checking Controls

Once the housing has been closed, make sure the housing controls line up with the camera’s controls. If the housing controls are misaligned slightly make sure the camera hold down bolt has been tightened down firmly so the camera is flat against the tray.

Turn Camera On

Turn the camera on and operate each of the housing controls to get a feel for using the camera in the housing. Take a few pictures above water with the camera in the housing.

Using Flash

Using the Camera’s Built-in Flash.

If you do not have an external flash, the camera’s built-in flash can be used. See Diffuser instructions.

NOTE: The camera’s built-in flash cannot be used with optional Wide-angle lenses.

Diffuser and Deflector Installation	Deflector

		Housing shown with
7	8	Deflector installed.
7	8

1200, Mju1200 specifications

The Ikelite Mju1200 is a powerful underwater housing designed specifically for the Olympus Mju 1200 camera, renowned for its compact design and robust performance. With its innovative features, the Mju1200 sets a standard for underwater photography enthusiasts and professionals alike.

One of the standout characteristics of the Ikelite Mju1200 is its impressive depth rating. This housing is designed to withstand depths of up to 130 feet (40 meters), making it suitable for both shallow snorkeling adventures and deeper scuba diving excursions. Its durability is reinforced by a sturdy polycarbonate construction that ensures long-lasting use in the harsh marine environment.

In addition to its durable design, the Mju1200 offers excellent accessibility to camera controls. The housing includes ergonomic tactile buttons that provide intuitive access to all essential functions of the camera, enabling users to adjust settings swiftly while submerged. This feature is particularly valuable when capturing spontaneous moments underwater, where time is often of the essence.

The Ikelite Mju1200 also boasts a transparent back, allowing photographers to easily monitor the camera's settings while keeping it protected from water. The housing's wide-angle port is another significant feature, which allows for capturing stunning underwater landscapes. This port accommodates a variety of lenses, providing versatility for different shooting scenarios.

Moreover, the Mju1200 supports the addition of external lighting systems, enhancing the quality of underwater images. Photographers can connect external strobes via fiber optic connections, ensuring that the subjects are well-lit and colors are vibrant, even in deeper waters where natural light is limited.

For added convenience, the Ikelite Mju1200 features a secure double O-ring seal that prevents leaks, along with a reliable locking mechanism that keeps the camera safe. This attention to detail ensures peace of mind for divers and snorkelers who are exploring under the waves.

In summary, the Ikelite Mju1200 stands as a testament to the evolution of underwater photography equipment. With its sturdy construction, user-friendly controls, and support for external lighting, it meets the demands of those who wish to capture the beauty of the underwater world. Whether you are a beginner or an advanced underwater photographer, the Ikelite Mju1200 is a worthy companion for your underwater adventures.