Sharp HT-SB60 Maintenance, Error indicators and warnings, Specifications, Cleaning the cabinet

Maintenance

■Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth.

Caution:

●Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish.

●Do not apply oil to the inside of each component. It may cause malfunctions.

Error indicators and warnings

When you fail to perform operations properly, the following messages are displayed on the sound bar.

Display		Meaning
	● When there is no input signal.
		Play back the connected
		equipment.
	●	Nonstandard signal. Cannot
		be recognized.
	● Signals other than DOLBY
		DIGITAL, DTS, Linear PCM
		cannot be recognized.
(Display blinks)	●	Poor connection of the digital
		audio input terminal.
	● Turn off the sound bar and
		check if the cable is
		connected properly.
	● When the protection circuit is
		activated.
Demo indicator
(blinks red)

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There maybe some deviations from these values in individual unit.

■Sound Bar

Power source	AC 220 - 240 V ~ 50/60 Hz
Power	Power on: 38 W
consumption	Power standby: 0.4 W (*)
Dimension	Width: 1385 mm (54 - 1/2")
	Height: 73 mm (2 - 7/8")
	Depth: 68 mm (2 - 11/16")
Weight	3.6 kg (7.92 lbs.)
Output power	RMS: Total 160 watts
	RMS: 160 W (80 W + 80 W) (10% T.H.D.)
	RMS: 120 W (60 W + 60 W) (1% T.H.D.)
Output	HDMI™ output: (audio/video support up
terminal	to 1080p) x 1
Input terminal	analogue input (AUDIO IN): x 1
	500 mV / 47 kohms
	Optical digital input (OPTICAL):
	Square type x 1
	HDMI input: (audio/video support up to
	1080p) x 2
Type	2 Way speaker system
	5.7 cm (2 -1/4") woofer
	2.5 cm (1") Soft Dome
Maximum	160 W
input power
Rated input	80 W
power
Impedance	4 ohms

(*)This power consumption value is obtained when the sound bar is in low power consumption mode. (Demo indicator turns off).

■Subwoofer

Power source	AC 220 - 240 V ~ 50/60 Hz
Power	33 W
consumption
Output power	RMS: 150 W (10% T.H.D.)
	RMS: 120 W (1% T.H.D.)
Type	Subwoofer system
	16 cm (6 - 5/16") woofer
Maximum	300 W
input power
Rated input	150 W
power
Impedance	3 ohms
Dimensions	Width: 144 mm (5 - 11/16")
	Height: 430 mm (16 - 15/16")
	Depth: 306 mm (12 - 1/16")
Weight	6.1 kg (13.42 lbs.)

E-14