Important Information | Numark Industries PRO TT-2 specs

PRO TT-2 Turntable

IMPORTANT INFORMATION...

Please read this entire manual before connecting the unit to your system.

For optimum performance:

1.Always make sure that AC power is OFF while making any connections.

2.Do not force the platter to stop moving while the motor is engaged. Quality slipmats should be used to hold records in position. Forcing the motor to stop can damage the motor assembly.

3.Never use spray cleaners or oils on the slide control. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment)

4.Never attempt to make any adjustments or repairs other than those described in this manual. Take the PRO TT-2

to your dealer or to an authorized Service Center.

5.Do not place the unit in a location where it will be exposed to direct sun light or near a heating appliance.

6.Do not place the unit in a location where there is high humidity or a lot of dust.

7.Cartridge may pick up slight sound pressure or vibrations of the speakers coming along the floor or through the air resulting in howling. Find a location, which is very stable and free of vibration.

8.The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally.

A NOTE ON CABLES:

Quality cable makes a big difference in audio

fidelity and punch. See your dealer or an electronics or audio specialist store if you are not sure which cables to get.

GENERAL SYSTEM PRECAUTIONS

•Use appropriate cables throughout your system: Quality shielded audio cables and terminated shielded video cables, low-capacitance preferred. Speaker cables must be 14-gauge minimum; 12- or 10-gauge is better.

•Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittent that could easily damage your speakers.

•Reliability will be enhanced through the use of banana connectors on the speaker wires. Observe correct speaker

wire polarity. If in doubt, consult your dealer or a qualified technician.

•Take care to connect only one cable at a time. Pay attention to the color-coded, labeled Input and Output jacks.

•ALWAYS remember: “TURN AMPS ON LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients, which may cause severe speaker damage.

•Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier clipping.

•Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier distortion is THE major cause of speaker failure.

•To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or anything wet on top of the turntable!

- The Leader in DJ Technology

- 3 -

http://www.numark.com

PRO TT-2 specifications

Numark Industries is renowned for its innovative contributions to the world of professional audio equipment, and one of its standout products is the PRO TT-2 turntable. Designed for both aspiring DJs and seasoned professionals, the PRO TT-2 promises high-quality performance and versatility, making it an essential tool for anyone serious about vinyl playback and mixing.

One of the key features of the PRO TT-2 is its precision-engineered direct-drive motor. This technology provides exceptional torque, allowing for immediate start-up times and consistent playback speed. Unlike belt-driven turntables, the direct-drive system reduces issues related to speed fluctuations, ensuring that every performance maintains the highest fidelity and accuracy.

The PRO TT-2 comes with a high-quality S-shaped tonearm that is designed for optimal tracking. The tonearm is adjustable and equipped with anti-skate controls, allowing users to fine-tune their setup for various cartridge types. This precision ensures that the needle stays properly aligned in the groove, minimizing wear on records and maximizing sound quality. The turntable is compatible with a range of cartridges, giving users the flexibility to choose the best one for their needs.

A standout feature of the PRO TT-2 is its built-in USB output, which allows DJs and audiophiles to easily digitize their vinyl collections. This functionality is particularly beneficial for those looking to preserve their records or share their mixes digitally. With this feature, the PRO TT-2 bridges the gap between analog warmth and digital convenience.

Additionally, the PRO TT-2 boasts a sturdy construction with heavy-duty materials, which not only enhances durability but also minimizes unwanted resonance and vibrations. The turntable is equipped with a vibration-dampening base that ensures the sound produced is clean and free from interference.

For users who are looking to integrate the PRO TT-2 into a broader DJ setup, the turntable features a standard RCA output, making it easy to connect to mixers and audio interfaces. This seamless connectivity is crucial for live performances where reliability and sound clarity are paramount.

In conclusion, Numark Industries' PRO TT-2 turntable is a versatile and robust option for any DJ or vinyl enthusiast. With its direct-drive motor, adjustable tonearm, USB output, and solid construction, it stands out as a reliable choice that meets the demands of both performance and everyday use. Whether mastering a set at a club or digitizing a beloved record collection, the PRO TT-2 demonstrates Numark's commitment to delivering quality and innovation in the world of audio.