SECTION 2
DISASSEMBLY
1. Remove Simcard holder , antenna (no tool needed), 2. Remove 4 screws. battery cover and battery.
3. The back lower case assy and battery plate can now 4. Remove 4 screws from the upper shielding. be separated from the upper case.
5.The electronical part (= MMI board with RF/logic unit as a whole) is held onto the upper case by a claw on either side. Therefore , in order to release the upper case from the electronical part , squeeze both sides of the upper case gently to the outside and at the same time push the electronical part upward.
6.The upper case can now be taken away , speaker, earphone microphone and keyboard are now accessible.
6