PRO
DIAGRAM AND PARTS DESCRIPTION
9 |
| 10 |
8 |
| 11 |
7 |
| 12 |
6 |
| 13 |
5 |
| 14 |
4 |
| 15 |
1 | 17 | 16 |
|
2
3
To fully appreciate the features of the 
Start by removing all parts from the package and place on a level surface. Carefully check all packing material for hidden parts. Use the contents guide for reference. Do not discard any packing materials!
1.Power Dial
On - Rotate Right
Off - Rotate Left
2.START/STOP - Pressing once engages high torque motor; pressing again engages brake.
3.Platter Revolution Speed Buttons
33rpm - Press 33 45rpm - Press 45 78rpm - Press 33 and 45
4.Strobe Light - Pulses a beam of light at the Strobe Dots. The large dots will seem not to move when pitch is 0%.
5.Strobe Dots - Four rows of dots that indicate various stages in pitch adjust.
0% - large dots
+3.3% - next row
+6% - inner row
6.Platter - Place this on the Center Spindle.
7.Center Spindle - Keeps platter and records centered. Place the supplied slipmat on the Center Spindle now.
8.45 Adapter - Place on Center Spindle for playing 7” records with large center holes.
9.Forward/Reverse Buttons - Determine the direction the platter will spin.
10.Lid Hinge Holder - Place the bottom tabs of your lid hinges in here after you finish assembly.
11.Extra Stylus Holder - Place an extra headshell here.
12.Tone Arm Assembly - Explained in tonearm section
13.Pitch Adjust - Use this to change the speed of the platter when quartz lock is inactive.
14.Pitch Percent Indication – Shows the amount of pitch change possible
15.Quartz Lock
On - will hold the revolution speed to 0% Off - will allow use of the Pitch Adjust
HOLD DOWN- to alternate from 10% to 20% Pitch
16.Target Light - Press the button to the right and a light will pop up directed at the stylus position.
17.Voltage Selector - With unit unplugged set the desired voltage for your location using a screw driver.
- The Leader in DJ Technology
©2000Industries | - 6 - | http://www.numark.com |