CHANGING ALERT MODES
1.Press X. Either “Silent?” or “Audio?” is displayed, depending on the current mode.
2. To change the alert mode, press W.
For your pager to vibrate, it must be in the “silent” mode.
TURNING YOUR PAGER OFF
1.Press X until the “PAGER OFF?” prompt is displayed.
2.Press W to turn the pager off.
With the pager off, the clock is shown on the display, but not the “Alert Mode” indicator.
SETTING THE ALARM
Your pager’s alarm can be set to alert you to a certain time of day. Set the alarm as follows:
1.Press X until “SET ALARM?” appears on your display.
2.Press W to select alarm on/off sequence.
3.To move to the next digit, press W. To advance through each digit, press X. Repeat this process for each field (On/Off, hours, minutes, AM/PM).
4.Press W to turn the alarm on or off.
5.Press the ● button twice to return to the main display menu.
The \ indicator appears on the display when the alarm is turned on. At the selected time, the alarm vibrates or emits a unique
1.Press any button to stop the alarm alert.
SETTING THE TIME
Set the displayed time as follows:
1.Press X until “SET TIME?” is displayed. Then pressW once.
2.Press X until desired hour appears.
3.Press W to move to the next digit.
4.Repeat process for each field (hours, minutes, AM/PM).
5.Press the ● button twice to return to the main display menu.
7