5.Release
to allow the other party to talk.
6.Press EXIT
or
to end the call.
•Note: For more Barge methods refer to your user manual.
Making an Alert Call from the Push to Talk Contacts List
1.Press 
to display the Push to Talk contacts lists.
2.Press
to highlight the name or number of the person to call.
3.Press ALERT 
, then press and release 
to send the Alert Tone and start the call.
4.After the called party responds, then releases floor control to you, press and hold 
and listen for the OK to Talk tone.
5.After you receive the OK to Talk tone, continue to hold down 
to talk.
6.Release 
to allow the other party to talk.
7.Press EXIT 
or 
to end the call.
Making an Alert Call from the Idle Display using the keypad
1.From the idle display, push the appropriate keys on the keypad to enter the Push to Talk number.
•Note: As you enter the number, it is compared against entries in the contacts list for aname match. If a match is found, the name replaces the number entered after pressing the Push to Talk 
button.
2.Press 
to display the Dialing Menu.
3.Press 
(if required) to highlight Alert.
4.Press SELECT 
then press and release
to send the Alert Tone and start the call.
♥2005 Verizon Wireless | 3 |