4.3.ERROR 56
This is the most common error that can occur while upgrading the phone. This error occurs:
1.If the phone is not connected to the data cable when clicking on Click Here to Upgrade Your Phone.
2.If the phone is not powered on when clicking on Click Here to Upgrade Your
Phone.
3.If you press Click Here to Upgrade Your Phone immediately after powering on the phone and before the phone shows “Device Attached” message.
4.If the phone is disconnected after clicking on Click Here to Upgrade Your Phone prior to completing the upgrade.
5.If the phone was connected to the USB cable before installing the application. If this occurs, you will need to do the following:
a.Disconnect the data cable from your computer.
b.Uninstall the application from your computer.
c.Restart your computer.
d.Reinstall the upgrade utility to your computer.
e.Connect the data cable to the computer and reinstall the software upgrade on your phone.
GPS Phone Software Upgrade Instructions | 14 |