Viewing Call Barring Status
To view the Call Barring status:
1.From the Phone Ready screen, press n until you see the “Bar” menu option.
The time, date, and menu option, “Line2”, do not appear in GSM.
Phone Ready (System Name)
Bar | Line2 |
2.Select “Bar”. The “Call Barring Incoming” screen displays.
3.Press s. The “Call Barring Outgoing” screen displays.
4.Press s again. The “Call Barring Recall Status” screen displays.
Call Barring
Recall
Status
Exit | Ok |
5.Select “OK”. At this point, you are now required to enter your passcode then select “OK”. Next, the “Please Wait” message displays.
If you enter the wrong passcode, the “Wrong Bar Passcode” message displays then the “Enter Bar Passcode” screen displays again. Carefully
passcode. It must be between 4 and 8 digits.
Enter Bar Passcode
*****
Cancl | Ok |
6.After the “Please Wait” message, the “Call Bar Incoming” Status screen displays. Do one of the following:
•To view only the Call Bar Incoming status, select “OK”.
•To view the Call Bar Outgoing status, press s, then select “OK”.
Changing Your Call Barring Passcode
To change your call barring passcode:
1.From the Phone Ready screen, press n until you see the “Prgm” menu option.
The time, date, and menu option, “Line2”, do not appear in GSM.
2.Press 4, 8. The “48=Change Bar Passcode” screen displays.
3.Select “OK”. The “Old Code?” screen displays.
48=Change Bar Passcode
4.Enter your current passcode then select “OK”. The “New Code?” screen displays.
Exit | Ok |
www.motorola.com
40