The second line of text on the Phone Ready screen displays the System Name, which is the name of the network providing service in the iDEN or GSM service area.
If your Home carrier is an iDEN carrier, then when you are in an iDEN service area, the third line displays the local time and date. When you are in the GSM service area, the third line displays the name of your Home carrier.
The LED indicator located on the front of the i2000plus phone shows the service state. See Table 1 .
Table 1: Status Light (LED) Indicator
LED Indicator | Status of Your i2000plus Phone |
|
|
Flashing Red | |
| signing on to your carrier’s network. |
| Please wait. |
|
|
Solid Red | No |
| cannot sign on. It will continue trying to |
| connect every two minutes as long as |
| it is turned on. |
|
|
Flashing Green | In |
| ready to use. |
| You can now place and receive calls. |
|
|
Solid Green | In |
| currently being used. Check to make |
| sure that you ended the last call by |
| pressing e. |
|
|
Turning Off Your i2000plus Phone
Press and hold f until you see the message “Powering Off”.
Light Sensor
On your i2000plus phone, when a key is pressed, the light sensor will activate the backlight only when your phone is in low light conditions. If illumination is needed, even when the backlight is not present, you can manually override the sensor by pressing and holding n. This will activate the backlight. In a charger, the backlight will always be illuminated.
www.motorola.com
18