Samsung Guide to Washer Door Reversal for SDC3B, SDC1 Models

installing your dryer

DOOR REVERSAL (SDC16***, SDC17***, SDC3B***, SDC35*** ONLY)

Depending on your requirements (installation location, space constraints), you can change the direction the door opens.

This is done according to the customer’s needs. The qualified technician or customer can do this WARNING themselves directly.

1.	Unplug the power cord.	Frame-Front
2.	Remove the two screws from the door-hinge.	Assy-Door
3.	Lift the door to separate it.

Hinge-Door

4. Remove the 16 screws.

5.After removing the screw, rotate the holder-glass, the door-glass, and the cover-door (I) by 180˚ as shown in the figure.

•Since the holder-glass, the door-glass, and the cover-door (I) are not CAUTION completely fixed, rotate them holding the lower part so that they are

not separated.

•Work carefully so that the door-seal is not removed.

Door-Glass

Holder-Glass

Seal-Door

Cover-Door(I)

6.After rotating them by 180˚, hold them in the position as shown by

the figure.

7.Assemble the glass-holder in the correct direction. (After the

disassembly, assemble it by rotating it by 180˚.)

16_ installing your dryer

SDC14709-02885C-08_EN.indd Sec3:16 2013-03-29 ￿￿ 10:36:17