installing your dryer

TOOLS NEEDED FOR INSTALLATION

Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup, adjustment, and connection, it is considered the responsibility of the installer. If you install the dryer you are responsible.

Make sure you have everything necessary for proper installation (AC 220~240V/50Hz).

1.A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements (See page 11).

2.CONDENSING SYSTEM - Condenses, processes and circulates hot and humid air internally using an internal heat condenser.

SEE DRYER EXTERIOR

Plug

Work top

Control panel

Water tank

Door

Filter case

Condenser

Leveling feet

Parts

DRYER YOUR INSTALLING 01

Hose guide

Cable tie

Hose connector Long drain hose(2m) Manual book

 

 

 

installing your dryer _9

SDC14709-02885C-08_EN.indd Sec3:9

2013-03-29 ￿￿ 10:36:16