8.Fasten the 16 screws in the correct positions.

9.Note that two of the screws have a different length from the others. (Use the longer screws for the door-lever.)

10.Move the position of the screw at the back of the door-hinge.

11.Fasten the screw in the bottom hole.

12.Remove the two screws holding the front-frame at the left.

13.Remove the two screws holding the holder-lever at the left.

DRYER YOUR INSTALLING 01

Holer-Lever

14.Now, move to the right side of the product and fasten the two screws holding the front-frame and the two screws holding the lever-holder.

15. Align the door with the fixing holes.

16. Fasten the two screws holding the door-hinge.

Inside the drum

You can restore the direction the door opens by following the procedures above, if necessary.

installing your dryer _17

SDC14709-02885C-08_EN.indd Sec3:17

2013-03-29 ￿￿ 10:36:18