Samsung SDC16709/XEE, SDC3B701/XEE, SDC35701/XEE, SDC17709/XEE manual MY Cycle, Delay END

MY CYCLE

Lets you activate your customised cycle that includes Dryness, drying temperature and time option. By pushing the My Cycle button, you activate the settings used during the previous My Cycle mode. (Default : Normal Cycle)

If My Cycle mode is activated, the My Cycle indicator will be lit. You can select all options in My Cycle mode as follows.

1.Select cycle using the Cycle Selector dial.

2.After cycle selection, set each option.

Each cycle has certain default options that are automatically set.

To see these default options, go to page 32.

3.Then, you can start My Cycle by pushing the Start/Pause button in My Cycle mode. The cycle and options you select will be displayed the next time you choose My Cycle.

You can change the My Cycle settings by repeating the same process above.

The last used setting will be displayed the next time you choose My Cycle.

DELAY END

You can set the dryer to finish your drying cycle automatically at a later time, choosing a delay of between 4 to 19 hours (in 1 hour increments). The hour displayed indicates the time at which the dry will be finished.

1.Manually or automatically set your drying machine according to the type of laundry you are drying.

2.Press the Delay End button repeatedly until the required delay time is set. If the delay time is set, the “Delay End” function becomes ON state.

3.Press the Start/Pause button. The “Delay End ” indicator will blink and the clock will begin counting down until it reaches the set time.

4.To cancel a Delay End function, press the Power button and then turn the dryer on again.

operating Instructions, tips _21

02 OPERATING INSTRUCTIONS, TIPS

SDC14709-02885C-08_EN.indd Sec5:21 2013-03-29 ￿￿ 10:36:20