Oracle Audio Technologies V owner manual Aluminium Towers

Page 6

changing the position of the spring in its holder. The color coding is visible from the inside at the wider end of the spring.

Note 2: The reference to clockwise or counter-clockwise is determined by viewing the spring from above, unless otherwise mentionned.

Note 3: By hand the spring can only be rotated counterclockwise in its holder but, using needle nose pliers, it can be held near the tip at the wider end. It is then possible to move it clockwise. If this cannot be done, rotate the spring counterclockwise until it comes out and reinsert it from under the holder leaving more of the spring out.

Note 4: Before installing the spring back into the suspension housing, hold it with one hand and pull on it at the wider end, this stretching will insure a positive seating in the threads of the holder.

Step one

Pre-loading the spring.

-Ajust the spring so three coils are showing below the holder.

Step two

Preparing a spring module.

-Position the upper spring damper over the suspension stem.

-Install the sorbothane damper over the spring holder and seat it well around the lip.

-Insert the spring assembly into the suspension housing.

-Install the suspension housing over the spring assembly.

Note 5: The factory standard settings

ALUMINIUM TOWERS:

Yellow, front left module

Red, rear left module

Green, right module

The blue spring is supplied as extra.

GOLD TOWERS:

Red, front left module

Green, rear left module

Blue, right module

The yellow spring is supplied as extra.

Note 6: The standard spring combination will accommodate most tonearms.

Step three

Calibrating the suspension.

... calibrate the suspension...

Note 7: Before beginning this step the record clamp and an old record must be in place over the platter. This will give a more accurate operational mass of the sub chassis.

Note 8: Do not install the drive belt nor the phono lead so as to prevent any bias in the interpretation of the calibration.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Oracle Audio Table of Contents Pack and unpack your Delphi Assemble the sub chassisAdjust the plinth assembly Install the tone arm and phono cartridgePrecisely align the phone cartridge Calibrate the suspensionAluminium Towers Page Install the drive belt Remove the platter with the drive belt installed Connect the power supplyAdjust the 33 and 45 speed Operate the record clamp Install and calibrate the hingesAttach the ground lead Level your DelphiFor maintenance If the platter is not parallel with the plinthIf 33 and 45 speed becomes erratic` People at Oracle Audio Technologies inc

V specifications

Oracle Audio Technologies V stands as a hallmark in high-fidelity audio engineering, renowned for its commitment to exceptional sound quality and innovative design. The company has carved a niche for itself in the audiophile community by blending artistry with cutting-edge technology to create products that truly enhance the listening experience.

One of the standout features of the Oracle Audio Technologies V is its unique design philosophy. Every component is meticulously crafted to minimize resonance and vibration, ensuring that sound purity is maintained. The use of high-quality materials plays a crucial role in this process, with solid aluminum and hardwood options that not only provide aesthetic appeal but also enhance acoustic performance. The visual elegance of the products speaks to the brand's dedication to both form and function.

At the heart of Oracle Audio Technologies V’s offerings is the patented Delphi turntable, which is celebrated for its precision engineering and exceptional sound reproduction. This turntable incorporates advanced technologies, including a finely-tuned suspension system that isolates the platter from external vibrations. The result is a stable platform that allows for accurate playback of vinyl records, revealing subtle nuances in music that are often lost in inferior systems.

Complementing the turntable is Oracle’s advanced tonearm technology, designed to ensure optimal tracking and reduce distortion. The tonearm features adjustable settings that allow users to fine-tune the tracking force and anti-skate parameters, catering to individual preferences and record conditions.

Another defining characteristic is the incorporation of advanced digital solutions alongside traditional analog components. Oracle Audio Technologies V embraces digital streaming technology, ensuring that users can enjoy high-resolution audio from a variety of sources. This dual approach allows audiophiles to experience the best of both worlds, merging the warmth of vinyl with the convenience of digital music.

The Oracle Audio Technologies V is also known for its elaborate phono stages, which are meticulously engineered to provide high gain and low noise, translating to clear and dynamic sound. These phono preamps are designed to support a variety of cartridge types, ensuring that users can customize their playback systems.

Overall, Oracle Audio Technologies V is synonymous with high-performance audio, embodying a commitment to excellence in every aspect. The integration of innovative designs, high-quality materials, and advanced technologies makes their products a favorite among audiophiles, providing an unparalleled listening experience that resonates with music lovers across the globe.
Top Page Image Contents