Oracle Audio Technologies 2500 MK II, CD 2000, 2000 Transport manual Safe Operating Instructions

Page 13
SAFE OPERATING INSTRUCTIONS

SAFE OPERATING INSTRUCTIONS

Please Follow these Important Safety Tips for The Safe Operation of your CD Player

The main Power On/Off switch for your CD Player/Drive is located on the rear of the power supply.

Note Do not activate this switch until you have read the instructions below.

1.Before switching on your CD Player/Drive it is essential that the aluminium top cover be correctly installed and remain in place until the CD display indicates the “No Disc” message.

2.To start playing a CD: remove the aluminium top cover; select the CD you wish to play and place it on the CD turntable. Install the magnetic clamp and replace the top cover.

3.Press the Reset button and wait for the disc information to appear in the main CD display. The information will show the number of tracks on the CD and the total playing time.

4.Press “Play” and adjust the volume control on your pre-amplifier, sit back, and ENJOY PURE MUSIC!

5.To change a CD, press “Stop”, the CD display will again show the disc information. Remove the aluminium top cover, lift your CD using one of the methods described earlier. Gently peel the clamp from the CD. Select your next CD and place it on the CD turntable as described above. Having placed the disc on the turntable, the display will still show the details of the previous CD player until you press the Reset button, only then will the new disc information be displayed.

Note: These instructions may seem extremely basic, but they must be followed exactly to ensure safe operation of this product!

Display Keyboard Function Selector

The display module is equipped with five selector buttons.

Place a compact disc over the centering device of your CD turntable.

Position the magnetic disc clamp over the centering device and make sure it is well seated.

Very carefully seat the aluminium top cover over the compact disc in it’s specially machined recess and position it so the two finger slots match the ones on the player main chassis. The slightly curved section of the finger slots should be facing the front of the unit.

Oracle Audio Technologies

13

CD 2500 MK II player / CD 2000 transport Owner’s manual

Image 13
Contents CD 2000 Transport Oracle Audio Technologies CD 2500 MK II playergx Y Çx TÜà Éy cÄtç Çz `âá FOR YOUR RECORDS FOREWORDTABLE OF CONTENTS CONTENT Accessories Foam Block PACK AND UNPACK YOUR CDSmall needle pliers Remove the “C” shape, hold down spacer block Suspension fin Tuning SUSPENSION FINE TUNINGMake the Suspension Housing Sit Lower Make the Suspension Housing Sit LowerCD 2000 Transport CONNECTION PROCEDURECD 2500 MK II Player Connection to the Pre-Amplifier,CD input Important Warning POWER SUPPLY CONNECTIONMaintenance THE MAGNETIC DISC CLAMPOperation To Remove the Magnetic Disc Clamp optionSAFE OPERATING INSTRUCTIONS To Play a Different Compact Disc To Play a Compact DiscWHAT IT DOES & HOW TO DO IT REMOTE CONTROL OPERATIONFUNCTION KEY Oracle Audio TechnologiesOracle Audio Technologies STOPexact point it was originally suspended Routine Cleaning ROUTINE CLEANING OF THE LASER LENSImportant Warning Fuse Types FUSE REPLACEMENTGMD Fuse Type only Oracle Audio Technologies many years of satisfaction