Troubleshooting
Before Calling For Service
Is the phone locked?
See Electronic Lock, page 38.
Is NS (No Service) lit?
See
Have you charged the battery?
Refer to “Prepare the Battery for Initial Use” on page 1 for charging instructions.
Have you programmed a unique operating mode?
Constant flashing of RM while in your home service area may indicate that an incompatible System Type has been selected. Refer to “Reviewing / Changing Scanning Mode” on page 44.
Is the phone operating with
You may have inadvertently selected improper operating characteristics. See Feature Menu, page 31.
Have you selected the wrong home system?
If your phone is programmed for
(see page 43), press RCL , to display the active telephone number.
Are new Profile accessories not working with older Profile phones?
Because of increased charging capabilities designed into
your new Profile phone, some accessories that plug into the data connector will not fit older versions of Profile phones.
NOTE Older versions of Profile charging accessories that plug into the data connector may not charge new
Profile phones.
47