FTS Programming, To Play AN FTS Disc | Krell Industries MD-20

FTS PROGRAMMING

To program tracks in the FTS memory:

NO.TE:Before you begin,place disc to be progra.mmed on tl~e unit and press PLAYOnce.tl~e unit reads tl~e table

of contents and displays the disc's playing time,press STOEYou can now begin programming fhe FTS memory.

1.Programthe selections in the standard form described above.

~. After you have progra.mmedthe tracks, press the FTS utton on the front panel or on the remote control. The

FTSindicator in the display will flash.

~. While the indicator is flashing press the PROGRA.M utton. The machinewill then display a numberon tl~e

screen briefly. This is the FTSdesignation number. When this number appears the FTSprogramming is complete.

NOTE:You may want to label the disc you programmed with the FTSdesignation numberso it can easiIy be erased or changed-in the future.

4. You can now start playing your FTSprogrammeddisc.

TO PLAY AN FTS DISC

1.Press the FTSbutton on the remote or front panel before you press PLAY.

2.The FTSindicator on the display will flash.

3.While it is flashing, press the PLAYbutton and the

.MD-10wi.ll play_ only trie tracks in FTSmemqry.If you do not wisl~ to play.only the FTSselected tracl~s on a disc, press Play wltl~ out pressing the FTSbutton first. The entire disc will nowplay.