Motorola 68014301013, TK30 manual Install the microphone

Page 11

Install the microphone

Caution: The location of the microphone and microphone cable must not interfere with the vehicle's air bag deployment. In particular, side airbags located with the windshield pillar or door jamb.

1Mount the microphone in a suitable location using either the screw, velcro, or clip (supplied).

•For optimal hands-free performance, mount the microphone on the overhead console/dome light assembly near the front center of the vehicle, away from the window, pointed toward the driver's mouth.

•Locate the microphone no more than 16 inches (40 cm) from the driver.

•Do not allow anything (such as a rear-view mirror or sun visor) to block the path between the microphone and the driver.

•Mount the microphone firmly so that vibrations do not affect audio quality.

•Refrain from locating the microphone directly in the path of heat/AC vents.

•Refrain from mounting the microphone on door pillars or windows that can transmit exterior wind noise to it.

•Do not attach microphone to the vehicle's visor.

2Route the microphone cable down the side of the windshield, through the dash, and to the vehicle integration kit.

3Connect the microphone to the vehicle integration kit connector C (shown on page 4).

Connect the ISO cable

Use the ISO cable to connect the car kit to your vehicle. It connects the vehicle's power, ignition, and entertainment system to the car kit.

Installation 9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Motorola TK30 Page Congratulations Contents Before you begin InstallationInstall the vehicle integration kit Connect the audio cables Vehicle integration kit consists of these connectorsMount and connect the user interface module Select UIM orientation controls on left or right of display Installation Installation Install the microphone Should be no gap between connector and housing Turn off your vehicle’s ignition Set install preferencesSwitch Selective mute featureHome screen BasicsButtons and scroll knob Status icons IconsMusic playing icons Text promptsDevice name Connected Pairing Mode Enter If pin code requiredPair to Bluetooth devices Pair & connectSet Bluetooth device preferences Receive a call CallsJohn Hutchinson Alberts, TreyWhile on a call Say the phone voice CommandSelect Phonebook, Recent Calls, or Dial Number Joe HughesSwap phones Swapping PhonesJohn Smith Greensleeves From a Bluetooth deviceMusic From a USB storage device From an iPod/iPhoneControl your music VolumeAuxiliary Music From an auxiliary deviceSynchronize contacts from your phone PhonebookDownloading Phonebook Set music preferencesMax Chin MessagesRead new message? Set display preferences PreferencesSet user preferences Set audio prompt preferencesSoftware Copyright Notice Safety & General InformationEuropean Union Directives Conformance Statement FCC Notice to Users Avoid turning up the volume to block out noisy surroundingsCaring for the Environment by Recycling Disposal of your Mobile Device AccessoriesPage Page Page 68014301013

TK30, 68014301013 specifications

The Motorola 68014301013, also known as the TK30, represents a remarkable piece of technology in the realm of computing microprocessors. This chip, launched during an era of rapid technological advancement in the 1980s, was instrumental in the development of powerful and efficient computing systems, redefining performance metrics in its time.

One of the key features of the TK30 is its compatibility with the Motorola 68000 architecture, which was renowned for its thorough instruction set and operational efficiency. The TK30 extends this legacy, providing enhanced processing capabilities and improved instructions for complex computations. This compatibility allowed software developed for earlier Motorola processors to run seamlessly on the TK30, giving it an edge in versatility.

The TK30 boasts a 32-bit data bus and a 24-bit address bus, facilitating access to a significantly larger memory space, which is crucial for running advanced applications and managing more substantial datasets. This expanded memory capability was particularly beneficial for developers looking to create sophisticated software solutions or for companies looking to improve their computing power without overhauling their existing systems.

Another remarkable characteristic of the TK30 is its support for multitasking. As the demands for processor efficiency grew, the TK30 was designed to handle multiple operations simultaneously, allowing for smoother and faster execution of applications. This multitasking capability made it a preferred choice for various operating systems, further broadening its appeal in the computing market.

Power management is also a critical aspect of the TK30’s design. The processor employs advanced power-saving features, which help in reducing overall energy consumption, making it a suitable option for embedded systems where power usage is a crucial concern. This focus on energy efficiency aligns with contemporary demands for sustainability and longevity in electronic products.

In summary, the Motorola 68014301013, or TK30, is not merely a microprocessor; it is a versatile, powerful technology that has stood the test of time. With its robust compatibility with legacy systems, impressive memory capabilities, multitasking support, and energy efficiency, the TK30 continues to be relevant in discussions of historical computing innovations, symbolizing an era where microprocessor technology began to pivot towards the complexities of modern computing. Its influence can still be felt as the foundations it laid helped shape the trajectory of future processor designs and computing technologies.
Top Page Image Contents