Placing the system, System connections | Sharp HTSL70 instruction

Placing the system

Installation image:

Blu-ray

DVD player

Place the system as shown.

Remove the protective film covering the sound bar and subwoofer before using the system.

Notes:

●As the sound from the system is omni-directional, you can place the speaker anywhere you like. However, it is recommended to place it as close to the TV as possible.

●The front panel of the speaker is not removable.

Caution:

●Do not change the installation direction when the unit is turned on.

Placing the stand

Place the stand as shown.

Stand

System connections

Make sure to unplug the AC power cord before making any connections.

Subwoofer

Right Left

Sound Bar

White

AC outlet

Red

AC 120 V ~ 60 Hz

Speaker connection

Connect the wire without insulation tube to the minus (–) terminal, and the wire with red and white insulation tube to the plus (+) terminal.

Caution:

●Use speaker with an impedance of 4 ohms or more, as lower impedance speaker can damage the unit.

●Do not make a mistake when

connecting the right and left speakers. The right speaker is the one on the right side when you face the unit.

	● Do not let the bare speaker
	wires touch each other.
	● Do not allow any objects to fall	INCORRECT
	into or to be placed in the bass	INCORRECT
	into or to be placed in the bass
	reflex duct.

●Do not stand or sit on the subwoofer/sound bar. You may be injured.

E-10