Installing the Battery
Your phone is designed to use only Motorola Original™ batteries and accessories.
1 | 2 |
3
16 - Getting Started
Action
4If necessary, enter your SIM card PIN code and press the OK key to unlock the SIM card.
Caution: If you enter an incorrect PIN code 3 times in a row, your SIM card is disabled and your phone displays SIM Blocked.
5If necessary, enter your
Tip: The unlock code is originally set to 1234. Your service provider may change this number before you receive your phone.
Adjusting Volume
Press the up or down volume keys to:
• increase or decrease earpiece volume during a call
•increase or decrease speakerphone volume during a call
•turn off an incoming call alert
•increase or decrease the ringer volume setting when the home screen is visible
Tip: At the lowest volume setting, press the down volume key once to switch to vibrate alert. Press it again to switch to silent alert. Press the up volume key to cycle back to vibrate alert, then ring alert.
Charging the Battery
New batteries are shipped partially charged. Before you can use your phone, you need to install and charge the battery as described below. Some batteries perform best after several full charge/ discharge cycles.
Action
1Plug the travel charger into your phone with the release
tab facing up.
2Plug the other end of the travel charger into the appropriate electrical outlet.
3When your phone indicates Charge Complete, press the release tab and remove the travel charger.
Tip: You can safely leave the travel charger connected to your phone after charging is complete. This will not damage the battery.
Turning Your Phone On
Action
1Open your phone.
2Press and hold ofor
2 seconds to turn on the phone.
3If necessary, press Sto scroll to the User Account you want. Then press the SELECT key to select the account from the list (stored on the SIM card).
Getting Started - 17
Making a Call
To make video calls, see page 21.
Press | To | |
1 | keypad keys | dial the phone number |
2 | n | make the call |
3 | o | end the call and “hang up” the phone |
|
| when you are finished |
Tip: You can also close the phone to end the call.
Note: You can make an emergency call even when the phone is locked, or when a SIM card is not inserted (see page 62).
Answering a Call
When you receive a call, your phone rings and/or vibrates and displays an incoming call message.
When Open to Answer is On, open the phone to answer the call. To set Open to Answer, press M> Settings >
>Open to Answer.
If Open to Answer is Off: |
| |
Press | To | |
1 | n | answer the call |
| or |
|
| DIVERT or o | divert the call to your voicemail or call |
|
| divert number, as though your line was |
|
| busy |
2 | o | end the call and “hang up” the phone when |
|
| you are finished |
18 - Getting Started | Getting Started - 19 |