Motorola XPR 4300 Making a Call Alert, Sending a Quick Text Message, Sending an Emergency Alarm

Page 39

Making a Call Alert

1Press the preprogrammed One Touch Call button to send the Call Alert to a predefined ID.

2The green LED lights up.

3Two chirps indicate that the Call Alert acknowledge is successfully received.

Sending a Quick Text Message

1Press the preprogrammed One Touch Call button send a predefined Quick Text Message to a predefined ID.

2The green LED lights up.

3Two chirps indicate that the message is sent successfully.

OR

A low-pitch tone indicates that the message cannot be sent.

Sending an Emergency Alarm

1Press the preprogrammed Emergency button.

2The green LED lights up.

3When an Emergency Alarm acknowledgment is received, the Emergency tone sounds. The green LED blinks.

OR

If your radio does not receive an Emergency Alarm acknowledgement, and after all retries have been exhausted, a low-pitch tone sounds.

4Radio exits the Emergency Alarm mode.

If your radio is set to Silent, it will not display any audio or visual indicators during Emergency mode.

Privacy

Press the programmed Privacy button to toggle privacy on or off.

English

Image 39

Contents Page Page Declaration of Conformity Declaration of ConformityDeclaration of Conformity Contents ContentsAccessories Limited WarrantyAdvanced Features Important Safety Information Important Safety InformationSoftware Version Computer Software Copyrights Computer Software CopyrightsHow to Use This Guide What Your Dealer/System Administrator Can Tell YouGetting Started Getting Started Volume Knob clockwiseRadio Controls You Will Be Using Identifying Radio ControlsIdentifying Radio Controls Assignable Settings/Utility Functions Programmable Buttons Assignable Radio Functions Controls Switching Between Analog and Digital ModeDisplay Icons Identifying Status IndicatorsIdentifying Status Indicators LED IndicatorsAudio Tones Indicator TonesSelecting a Zone Making CallsReceiving and Making Calls ReceivingCalls Receiving and Responding to a Radio Call Receiving and Responding to a Group Call Receiving and Making Calls Receiving and Responding to a Private Call Receiving an All Call Making a Call with the Channel Rocker Making a Radio Call Making an All Call Permanent Monitor TalkaroundScan Advanced FeaturesAdvanced Features Scan ListsRelease the Nuisance Channel Delete button. Responding to a Transmission During a Scan Deleting a Nuisance Channel Restoring a Nuisance Channel Receiving and Acknowledging a Call Alert Call Indicator Settings Escalating Alarm Tone Volume Call Alert OperationEmergency Operation Sending an Emergency Alarm Sending an Emergency Alarm with Voice to Follow Sending an Emergency Alarm with Call Exiting an Emergency Mode Reinitiating an Emergency ModeText Messaging Features Privacy Sending a Quick Text Message Utilities Setting the Squelch Level Setting the Power Level Turning the Option Board Features On or Off Turning the External Public Address System On or Off Turning Horns/Lights On or Off Turning Radio Tones/Alerts On or Off For XPR 4350 GPS Models Only AccessoriesAccessories AntennasCables AudioSpeakers Desktop AccessoriesMiscellaneous Accessories Mounting KitsLimited Warranty Limited WarrantyWarranty VII. Governing LAW 6880309T09-C XPR Series Digital Mobile Radios Quick Reference CardMaking an All Call Audio Indicators for Programmable ButtonsSelecting a Radio Channel Subscriber ID, or Group ID Making a Group or Private CallPrivacy Sending an Emergency AlarmMaking a Call Alert Sending a Quick Text MessagePage Page 6880309T18