Motorola XPR 4300 manual Audio Indicators for Programmable Buttons, Making a Group or Private Call

Page 38

Audio Indicators for Programmable Buttons

Some programmable buttons use audio indicators to indicate the change as they alternate between two different choices.

Programmable

Positive

Negative

Button

Indicator Tone

Indicator Tones

 

 

 

Zone

In Zone 2

In Zone 1

 

 

 

Repeater/

In Talkaround

In Repeater mode

Talkaround

mode

 

 

 

 

Scan

Start Scan

Stop Scan

operation

operation

 

 

 

 

Squelch

Operating in tight

Operating in

squelch

normal squelch

 

 

 

 

Power Level

Transmitting at

Transmitting at

low power

high power

 

 

 

 

Horns and

The horns and

The horns and

Lights

lights feature is on

lights feature is off

 

 

 

Tones and

All tones and

All tones and

Alerts

alerts are on

alerts are off

 

 

 

Selecting a Radio Channel,

Subscriber ID, or Group ID

1Select the zone by pressing the preprogrammed Zone button to switch between zones.

2Press the Channel Rocker to select the required channel, subscriber ID, or group ID.

Making a Group or Private Call

Press the preprogrammed One Touch Call button and proceed to step 2.

OR

Follow the procedure below.

1Press the Channel Rocker to select the channel with the active group ID.

OR

Press the Channel Rocker to select the channel with the active subscriber ID.

2Press the PTT button to make the call. The green LED lights up.

3Wait for the Talk Permit Tone to finish (if enabled). Speak clearly into the microphone.

4Release the PTT button to listen.

5If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to

respond.

OR

If there is no voice activity for a predetermined period of time, the call ends.

For a Private Call, you hear a short tone when the call ends.

Your radio must have the Privacy feature enabled on the channel to send a privacy- enabled transmission. Only target radios with the same Privacy Key as your radio will be able to unscramble the transmission.

Making an All Call

Your radio must be programmed to allow you to use this feature. Users on the channel cannot respond to an All Call.

1Press the Channel Rocker to select the channel with the active All Call group ID.

2Press the PTT button to make the call. The green LED lights up.

3Wait for the Talk Permit Tone to finish (if enabled). Speak clearly into the microphone.

4If there is no voice activity for a preprogrammed period of time, the call ends.

When you receive an All Call, you cannot use any preprogrammed button functions until the call ends.

English

Image 38
Contents Page Page Declaration of Conformity Declaration of ConformityDeclaration of Conformity Contents ContentsAdvanced Features AccessoriesLimited Warranty Software Version Important Safety InformationImportant Safety Information Computer Software Copyrights Computer Software CopyrightsGetting Started How to Use This GuideWhat Your Dealer/System Administrator Can Tell You Volume Knob clockwise Getting StartedIdentifying Radio Controls Radio Controls You Will Be UsingIdentifying Radio Controls  Assignable Radio Functions  Assignable Settings/Utility FunctionsProgrammable Buttons Switching Between Analog and Digital Mode ControlsLED Indicators Identifying Status IndicatorsIdentifying Status Indicators Display IconsIndicator Tones Audio TonesReceiving Making CallsReceiving and Making Calls Selecting a Zone Receiving and Responding to a Group Call CallsReceiving and Responding to a Radio Call  Receiving an All Call Receiving and Making Calls Receiving and Responding to a Private Call Making a Radio Call  Making a Call with the Channel Rocker Making an All Call Talkaround Permanent MonitorScan Lists Advanced FeaturesAdvanced Features Scan Restoring a Nuisance Channel  Responding to a Transmission During a Scan Deleting a Nuisance Channel Release the Nuisance Channel Delete button.Call Alert Operation Call Indicator Settings Escalating Alarm Tone Volume  Receiving and Acknowledging a Call Alert Sending an Emergency Alarm Emergency Operation Sending an Emergency Alarm with Call  Sending an Emergency Alarm with Voice to Follow Reinitiating an Emergency Mode  Exiting an Emergency Mode Sending a Quick Text Message Text Messaging FeaturesPrivacy  Turning the Option Board Features On or Off  Setting the Squelch Level Setting the Power Level Utilities Turning Radio Tones/Alerts On or Off  Turning the External Public Address System On or Off Turning Horns/Lights On or Off Antennas AccessoriesAccessories For XPR 4350 GPS Models OnlyAudio CablesMounting Kits Desktop AccessoriesMiscellaneous Accessories SpeakersLimited Warranty Limited WarrantyWarranty VII. Governing LAW XPR Series Digital Mobile Radios Quick Reference Card 6880309T09-CMaking a Group or Private Call Audio Indicators for Programmable ButtonsSelecting a Radio Channel Subscriber ID, or Group ID Making an All CallSending a Quick Text Message Sending an Emergency AlarmMaking a Call Alert PrivacyPage Page 6880309T18