Sprint Nextel 2012J operating instructions Connecting the Telephone

Page 5

3. Replace the battery door and snap it shut (Fig. 2).

CAUTION

Make sure that the telephone line cord is disconnected before opening the battery door.

Replace the batteries when the LOW BATTERY INDICATOR LOW appears in the display or when the display gets dim.

‹When the batteries are dead, the display will not show. You can still make or receive calls, but you cannot use the Call Display or memory dialing.

‹When the batteries are dead, your call data and memories could be erased.

CONNECTING THE TELEPHONE

1.Connect the COILED HANDSET CORD to the bottom of the handset and the bot- tom of the base.

2.Connect the straight telephone line cord to the LINE CORD jack and telephone outlet on the wall .

3.Route the LINE CORD into the channel on the bottom of the base.

(For instructions on how to mount the telephone on the wall, see page 12.)

3

Image 5

Contents Page Table of Contents Location of Controls Telephone Installation Checking the Package ContentsInstalling Batteries Getting StartedConnecting the Telephone To program your Area Code Setting up the TelephoneSetting UP LANGUAGE, Area CODE, Time and Date To program the Time and Date Adjusting the LCD Contrast LevelBasics Choosing Tone or Pulse DialingMaking a Call Making and Receiving CallsReceiving a Call Pause FunctionTo Change a Stored Number Memory DialingUnderstanding Call Display service Call Display FeaturesWhen You Receive a Call Making Calls with One-Touch Speed Dial ButtonsCalling back from the Callers List Viewing the Callers ListStoring Phone Numbers from the Callers List Deleting the Data from the Callers List Using Message Waiting/MailboxTo Delete the Call Display Memory ONE by ONE To Delete ALL Callers List EntriesWall Mounting Without a Modular Wall Phone Plate Wall MountingDrill one hole Make sure the space between holes is 100mm Problems Check Trouble ShootingCall Call Display Battery Safety Instructions Limited Time Offer for Sprint Canada Local Customers