MAKING AND RECEIVING CALLS
MAKING A CALL
1.Pick up the handset.
2.Dial the phone number. The dialed number appears in the dis- play.
3.When you finish talking, replace the handset into the base.
RECEIVING A CALL
1.Pick up the handset when the phone rings.
2.When you finish talking, replace the handset into the base.
Volume Control and Ringer Setting
Adjust the handset | Slide the VOLUME control. |
volume |
|
|
|
Adjust the ringer level | Set the RINGER switch. |
| HI - loud rings on incoming calls. |
| LOW - lower rings on incoming calls. |
| OFF - no ringing on incoming calls. |
|
|
If you have subscribed to Call Display service, the caller’s number and/or name will appear in the display when you receive a call (see page 9).
Last Number Redialing and Pause Function
1.Pick up the handset.
2.Press the REDIAL button. The last dialed number appears in the display and is automatically dialed.
PAUSE FUNCTION
(Example: In an office where you need to dial a 9 first to get an outside line), dial the number 9 and press REDIAL button, and then dial the phone number. You will see a “P” displayed for PAUSE. You may also store this into memory.
6