Sharp MD-MT99C operation manual „ Using with the rechargeable or alkaline bat- tery

Page 31

„About charging time

After about 3.5 hours have passed, "" will go out. The battery charging is about 90 % complete.

To charge the battery fully, continue charging for about 2 more hours. In this case, you do not need to press the MODE/CHRG button. Even if the MODE/CHRG button is pressed, "" will not appear.

Notes:

zCharge the battery within the range of 5°C - 35°C (41°F - 95°F).

zCharging is completed if "" does not blink when you plug in the AC adaptor and press the MODE/ CHRG button.

zThe unit can be left in the charging state after it is completed.

Caution:

zUse the specified battery AD-N70BT only. Do not charge a battery (nickel-cadmium, alkaline, etc.) other than that specified.

zDo not remove the outer cover of the re- chargeable battery. It may cause heat gen-

eration, fire, or explosion.

z Do not dip the battery in water, do not dis- pose of it in a fire, and do not take it apart.

zIf the rechargeable battery terminal is dirty, charging may not start. In such a case, wipe off the dirt with a dry cloth.

zDo not disassemble the battery.

„Using with the rechargeable or alkaline bat- tery

1 Disconnect the AC adaptor.

2 Insert the rechargeable battery

or alkaline battery from the (+) marked side.

Use a commercially available LR6, "AA" size alkaline battery.

Notes:

zSetting the volume level to "0" whilst recording with the rechargeable or an alkaline battery reduces the bat- tery drain.

zWhen you do not use the unit for hours, remove the battery. (The battery drains gradually even when the power is turned off.)

zCarry the battery in the supplied case.

zThis unit can be used with the AC adaptor when the rechargeable or an alkaline battery is in the unit.

Caution:

Do not use a nickel-cadmium battery.

MD-MT99C

Useful Features -Battery Power-

ENGLISH

E-30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents MD-MT99C Introduction ContentsRechargeable Nickel Connection Cable AccessoriesRemote Control x Headphones x AC Adaptor x Special NotesDisplay/Character Select Button Mode/Charge Button Important Introduction -Names of Controls and Indicators„ Main unit 21, 26„ Display panel „ Remote control unit„ Storing the unit PrecautionsPrecautions „ ImportantInserting a MiniDisc Inserting a MiniDiscConnections ConnectionsPreparation Basic Operation -Recording RecordingDigital recording To stop recording To interrupt recordingAbout the TOC To update the recorded contents of the Mini- Disc„ About sampling rate converter „ Helpful tip when attaching a label„ Note for digital recording Basic Operation -Playback PlaybackPlayback „ Volume control„ Bass control „ To locate the beginning of a track Useful Features -Advanced PlaybackAdvanced Playback „ To locate the desired portion„ Random play or repeat play „ To play at double speedTo interrupt fast playback To return to normal playbackMonaural recording Advanced Recording„ Long-play recording Times and 4 times long recording„ About Atrac Useful Features -Advanced Recording„ About the recording mode Indication Recording mode„ Playback sound-actuated recording Advanced RecordingPress the REC button „ To start recording from the middle of a trackPress the Edit button „ To create your own track numbers„ Recording tracks as a single track Numbering restriction„ About track numbers Recording from a Microphone Useful Features -Recording from a Microphone„ To record from a microphone To write recorded contents on the MiniDisc About pause function „ Sound-actuated recording Mic Synchro- nised recordingDuring a mic synchro recording „ Track intervalsChanging intervals between tracks During a mic manual recordingChecking Displays Useful Features -Checking DisplaysTime for that track Press the Disp button to display the playingInsert the rechargeable battery Battery PowerUseful Features -Battery Power „ Charging the rechargeable battery„ Using with the rechargeable or alkaline bat- tery To cancel the hold mode Useful Features -Hold FunctionHold Function Changing Default Settings Changing Default SettingsTitling a MiniDisc Titling a MiniDisc„ Creating disc and track names „ To erase a charactor Characters symbols„ To enter a space „ Stamping titles from another MiniDisc Before stamping What is a master MiniDisc?What is a MiniDisc for stamping? „ To add charactersOperation of the MiniDisc for stamping Master MiniDisc operation„ To erase all of the tracks at once Editing a Recorded MiniDiscEditing a Recorded MiniDisc „ To erase tracks one at a time„ To combine tracks „ To divide a track„ To move a track „ Listening through a stereo system Listening through Another SystemAnother System Listening throughReferences -Other Features and Caution Other Features and Caution„ Resuming auto play „ Rechargeable battery MiniDisc System Limitations MiniDisc System LimitationsBlank MD Error MessagesError MES Meaning Sages No Signal Error MessagesTroubleshooting TroubleshootingReferences MaintenanceMD-MT99CSpecifications SpecificationsInput sensitivity Table des matières Batterie au nickel-métal Câble de raccordement AccessoiresTélécommande x Casque x Adaptateur CA x Remarques spéciales„ Appareil principal Commandes et voyantsCommandes Et voyants„ Afficheur „ TélécommandePrécautions Précautions„ Conservation de lappareil Place dun MD Mise en place dun MDMise en Avant lutilisation -Raccordement RaccordementAvant lutilisation -Raccordement Enregistrement numérique EnregistrementFonctionnement de base -Enregistrement Appuyer sur la touche RECPour arrêter lenregistrement Pour interrompre lenregistrementDu TOC Pour écrire lenregistrement sur MDAvertissement „ Note pour lenregistrement numérique „ Pour protéger les MD contre un effacement Accidentel„ Collage dune étiquette „ Convertisseur de taux déchantillonnageFonctionnement de base -Lecture LecturePour éteindre lenregistreur „ Commande de volume„ Commande de graves Pour arrêter la lecture„ Pour localiser un morceau Lecture avancéeLecture avancée „ Pour localiser un passage souhaité„ Lecture au hasard et répétition „ Pour reproduire à double vitessePour interrompre la lecture accélérée Pour repasser à une lecture ordinaireEnregistrement 2 ou 4 fois plus long Enregistrement avancéEnregistrement avancé „ Enregistrement de longue duréeIndication „ Du mode denregistrement„ À propos dATRAC „ Note pour lenregistrement 4 fois plus long LP4Duit „ Enregistrement déclenché par le son reproEn cours de lecture, appuyer sur la touche Appuyer sur la touche Edit „ Pour numéroter comme on le souhaitera„ Enregistrement des morceaux comme un Seul Limite de numérotage„ Numéros de morceaux Fonctions pratiques -Enregistrement à partir dun microphone Enregistrement à partir dun microphone„ Pour enregistrer par un microphone Lenregistrement reprend Fonction de pause Enregistrement à partir dun microphone suitePendant lenregistrement synchronisé par micro „ Intervalles entre morceauxChangement dintervalle Pendant lenregistrement manuel par microFonctionspratiques Vérification de laffichageAppuyer sur la touche Disp pour afficher le Vérification de laffichageTemps de lecture sur le morceau en cours Introduire la batterie rechargeable Fonctionnement sur les pilesFonctions pratiques -Fonctionnement sur les piles „ Mise en place de la batterie rechargeableDébrancher ladaptateur CA Introduire la batterie rechargea „ Avec la batterie rechargeable ou une pile alcalineFonction de Pour annuler le mode de maintienFonction de maintien MaintienFonctions avancées -Modification des réglages par défaut Modification des réglages par défaut„ Titrage de disques et de morceaux Titrage dun minidiscMinidisc Titrage dun„ Pour insérer un espace „ Pour effacer un caractèreQuest-ce quun MD de cible ? „ Pour ajouter des caractères„ Copie de titres Avant la copie de titres Quest-ce quun MD de source ?Opération pour côté cible Opération pour côté source„ Pour effacer tous les morceaux à la fois Montage dun minidisc enregistréFonctions avancées -Montage dun minidisc enregistré „ Pour effacer des morceaux à la fois„ Pour fusionner des morceaux „ Pour diviser un morceau„ Pour déplacer un morceau „ Avec un autoradio Écoute à travers un autre systèmeAutre système „ Avec une chaîne audio„ Batterie rechargeable Autres fonctions et précautionsRéférences -Autres fonctions et précautions „ Reprise de la lecture automatiqueGé même si on efface des morceaux Limites du minidiscRéférences -Limites du minidisc Le temps restant peut demeurer inchanMessages Signification Derreur Messages affichésMessages affichés Messages Signification Derreur No SignalDépannage DépannageDépannage/Entretien EntretienFiche technique Fiche techniqueRéférences Limited Warranty / Garantie Limitée Garantie Limitée Sharp Corporation MD-MT99C Portable Minidisc Recorder

MD-MT99C specifications

The Sharp MD-MT99C is a portable MiniDisc player that has garnered attention for its sleek design and robust features. This device represents the evolution of audio playback technology in the late 1990s and early 2000s, offering users a compact and convenient way to enjoy their favorite music.

One of the main features of the MD-MT99C is its ability to read and write to MiniDiscs, a digital medium that allows users to store high-quality audio recordings. The MiniDisc format not only provides superior sound quality compared to cassette tapes but also offers additional features like re-recordability, allowing users to easily update their playlists without the need for purchasing new media.

The MD-MT99C boasts an impressive playback time, offering up to 80 minutes of high-quality sound on a standard MiniDisc. Its high-fidelity playback, complemented by Sharp's digital signal processing technology, ensures that users experience clean, clear audio. The device’s anti-shock mechanism enhances its portability by minimizing the risk of playback interruptions due to sudden movements or vibrations.

Another noteworthy characteristic of the Sharp MD-MT99C is its compact and lightweight design, making it highly portable. With an easy-to-read LCD display, users can navigate through their music library effortlessly. The intuitive interface provides quick access to playback functions, including play, pause, skip, and repeat, providing a user-friendly experience.

In terms of connectivity, the MD-MT99C is equipped with a headphone jack, allowing users to connect their favorite headphones for a personal listening experience. The device also features a line-out option, enabling users to connect it to external audio systems for boosted sound when desired.

Of course, battery life is a crucial aspect of any portable device. The MD-MT99C offers impressive battery performance, allowing users to enjoy their music for extended periods before needing to recharge or replace batteries. Additionally, the player supports a range of audio formats, ensuring compatibility with various music sources.

In conclusion, the Sharp MD-MT99C is a remarkable MiniDisc player that emphasizes portability, sound quality, and user-friendly features. Its combination of advanced technologies and practical characteristics makes it an attractive option for music enthusiasts seeking a versatile and reliable audio device. Whether at home or on the go, the MD-MT99C offers an enjoyable listening experience for those who appreciate high-quality sound in a compact format.
Top Page Image Contents