Radio Shack CT-501 owner manual Using Memory, Storing Speed Dial Numbers

17-1110.fm Page 31 Wednesday, July 21, 1999 1:38 PM

USING MEMORY

Your phone has 40 speed-dial memory locations that can each hold a phone number of up to 32 digits.

STORING SPEED DIAL NUMBERS

Note: If you are unable to complete Steps 2 and 3 within 2 minutes, the phone exits the procedure and its display goes blank to conserve battery power. Press END STO , then start over at Step 2.

1.Clear the display (if necessary), enter the phone number you want to store, then press STO . The phone displays LocATn (location) _ _.

2.Within 2 minutes, enter the two-digit memory location number (01–40) where you want to store the phone number. The display confirms the memory location you have chosen.

Notes:

•Remember that your phone uses memory location 01 for one-touch emergency dialing. Store only your local emergency number (such as 911) in that location.

•If you enter an invalid number (such as 41), the phone displays invALid LocATn, then LocATn _ _ reappears. Try again.

3.If you previously stored information in the selected mem- ory location, or if the phone’s memory is full, the selected location number and FULL appear briefly, then the phone displays the currently stored number followed by

ChAngE?.

To select a different memory location, press END STO , enter the new memory location number, then press STO .

31