Notes:
•PIN CALL appears if PIN code dialing is set to ON (see “PIN Code Dialing” on Page 46).
•NO SVC (no service) appears and three beeps sound if you are outside the cellular service area. See “Signal Strength.”
•NOT ALLOWED briefly appears if you try to make a restricted call (see “Selecting a Call Restriction Level” on Page 21).
3.To end the call, press END .
Signal Strength
The vertical bar on the left of the display shows the strength of the cellular signal your phone is receiving. The higher the bar, the stronger the signal.
If the signal strength is low, try moving to a different location. If you are using the phone in a building, try moving closer to a window.
If NO SVC appears, the phone is outside the cellu- lar service area. This means you cannot make or receive calls until you move the phone back inside the cellular service area.
14