Precor P80 CONSOLE manual Activating the Media Adapter, 5 1 5 6

Page 18

16	Installing the P80 Console Media Adapter

Activating the Media Adapter

By default, the P80 console is configured to use its internal tuner instead of the Media Adapter option. Before you can import your finished channel list file, you must activate the Media Adapter.

To configure the P80 console to accept signals from the

Media Adapter:

1.On the Welcome screen, press and hold Pause.

Figure 6: Pause key

2.While holding Pause, press each of the following keys once in the order presented. Referring to the diagram below, press:

1 2 3 4

Channel Up

Volume Down

Volume Up

Channel Down

Figure 7: Settings security code

3.Release Pause.

4.Using the keyboard on the screen, touch the following numbers to enter the password:

5 6 5 1 5 6 5

5.Touch OK.

Image 18

Contents Installing the P80 Console Media Adapter Page Page Trademark Note Intellectual Property NoticeTable of Contents Installing the P80 Console Media Adapter Installing External Receivers About Channel Types Channel paths to the P80 consoleSignal path comments Element Comments Configuring Receivers To configure each receiverCreating the Channel List Attaching Hdmi and Remote Control Cables to Consoles Media Adapter connectors within the P80 consoleMedia Adapter connector identification Installing Receivers in Junction Boxes Receiver and cable slot positioning Connecting Receivers To connect a receiverIR transmitter placement Configuring P80 Consoles Editing the Channel GuideActivating the Media Adapter 5 1 5 6To import the channel guide file Exporting the Channel Guide to other P80 Consoles To export the channel guide file from your consoleRemove the USB drive from the console Installing the P80 Console Media Adapter Servicing the Media Adapter Troubleshooting Problem Possible SolutionsRemoving and Replacing the IR Transmitter To remove the IR transmitterObtaining Service Page Precor Incorporated Receiver Brands and Models Supported by the P80 Media Adapter