AT&T Z221 user manual Powering Phone On/Off, Open the USB port cover

Page 7

Getting Started

1.Open the USB port cover.

2.Insert the charger’s USB adapter into the USB port.

3.Plug the charger into a standard AC wall outlet.

4.When the battery is fully charged, unplug the charger and disconnect it from the phone.

Notes:

•The phone automatically switches off if the battery power is too low.

•Make sure the charger’s connector is inserted correctly. Do not force the connector into the port.

•The battery will remain fully charged for 3 to 4 hours.

•Only use the charger provided by the original provider. Using an unapproved charger might be dangerous and violate the authorization and warranty rules of the phone.

•If the phone is used too often when the battery is low or not used for a long time, the screen may not display the charge indicator until the battery has been continuously charged for 10 to 40 minutes.

•To get the maximum performance out of your battery, it is recommended that you completely charge the battery before using the phone for the first time. A new battery’s full performance is only reached after three complete charge and discharge cycles have been finished.

•Charging is only possible within a temperature range of 32°F to 113°F.

Powering Phone On/Off

Note: Do not turn your phone on in areas in which wireless phone use is not permitted, or when it could cause interference or danger.

Hold the Power/End Key to turn your phone on or off.

Tips:

•When prompted, enter your PIN (Personal Identification Number) code or handset code and press the OK Key.

•The PIN code is the password provided by your network service provider. You cannot use the SIM card without it.

•When the PIN code or handset code is accepted, the phone automatically searches for the network. After a few seconds, your phone displays idle mode.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AT&T Z221 Legal Information Table of Contents Table of Contents Getting Started BatteryInstalling the Battery Removing the BatteryInserting the SIM Subscriber Identification Module Card SIM CardCharging Your Phone Getting StartedPlug the charger into a standard AC wall outlet Powering Phone On/OffBattery will remain fully charged for 3 to 4 hours Open the USB port coverGetting to Know Your Phone Getting Started Key Functions # Key Idle ModeIndicator What it means Key DescriptionGetting Started Icon What it Description Means Getting Started Main MenuUsing Predictive Text ZiAbc Changing Input ModeCurrent Text Mode Changing Input Mode or LanguagePress the OK Key Entering Text Entering Letters Abc/ABC/abcPress the # Key and select 123. The input method Press the * KeyCalls Types of Messages MessagesSMS and MMS Voicemail Using Message OptionsMessage Folders Please don’t text and drive Message SettingsUsing Message Templates Phone has 10 templates for SMS/MMS, and you can edit themFrom idle mode, select Menu Messaging IM Instant MessagingMobile Email Searching for a Contact Setting Speed DialAddress Book Adding a ContactAddress Book Using Address Book Entry OptionsMy Devices Enabling BluetoothGo down to My Bluetooth Info and enter the phone name Press the OK Key to save the settingsSending Data Enable Bluetooth functionReceiving Data Mobile Web options Using the att.net HomepageMobile Web Visiting a WebsiteCalendar AlarmPress the Left Soft Key for Options to access the following ToolsTools CalculatorTip Calculator StopwatchPress the Right Soft Key to exit World TimeCurrency Conversion Recent CallsPictures EntertainmentVideo Recording MusicVoice Recorder EntertainmentSocial Networking Access Social Networks and InformationAT&T Social Net YPmobile Yellow PagesFrom idle mode, select Menu YPmobile Select Voice call ringtone to set the voice call ringtone SettingsSound Profiles Settings Phone SettingsConnections Settings Display SettingsCalls Settings Phone Password Security SettingsPIN Codes FDN list allows you to create a list of fixed dial numbers Settings PUK CodesFixed Dial Numbers FDN ListTTY Mode AccessibilityHAC Hearing Aid Compatibility Mode General Care Care and MaintenanceImmediately remove an expired battery from the phone Care and MaintenanceGeneral Guidelines Ctia Requirements Vehicles Equipped with Airbags Aircraft SafetyHospital Safety Road SafetyDisposing of Your Phone Emergency ServiceThird-Party Equipment Declaration of ConformityPrivacy Information Turn on the HAC SettingCopyright Notice Problem Possible Causes Possible Solution Troubleshooting and FAQsUse a new battery Battery will notOr above 122 F 50C Avoid temperature extremes Check all connectors to make sure allTroubleshooting and FAQs Voice Recorder, Bluetooth SpecificationsFCC Compliance FCC ID Q78-Z221 Radio Frequency RF Energy

Z221 specifications

The AT&T Z221 is a straightforward and reliable feature phone designed to cater to the fundamental communication needs of users. Suitable for individuals who prefer simplicity over complexity, the Z221 is equipped with essential features that make it a practical choice for those who value ease of use.

One of the standout characteristics of the AT&T Z221 is its compact and lightweight design. The phone is designed to fit comfortably in the palm of the hand, making it easy to carry in a pocket or purse. Its durable construction ensures that it can withstand daily wear and tear, making it a dependable option for users who need a phone that can keep up with their active lifestyle.

The AT&T Z221 boasts a 2.4-inch display which, while modest by modern smartphone standards, is perfectly adequate for reading messages, viewing contacts, and navigating the device's user-friendly interface. The large, tactile keypad features well-spaced buttons that provide tactile feedback for a smooth typing experience, making it ideal for sending texts and dialing numbers.

Equipped with a 2-megapixel camera, the Z221 allows users to capture moments on the go. Though not on par with the advanced photography features found in smartphones, the camera serves its purpose for basic photography needs. Users can take and share photos easily, giving them the ability to document everyday experiences.

The Z221 supports essential connectivity options, including 2G GSM networks, which provide reliable voice calling and basic data services. This makes it an ideal choice for users who prioritize voice communication over data-heavy applications. The phone includes Bluetooth capability, allowing users to connect to headsets and other Bluetooth-enabled devices for hands-free calling.

Another notable feature of the AT&T Z221 is its long-lasting battery life. With a capacity that allows for extended talk time and standby duration, users can rely on the phone to stay connected throughout the day without the need for frequent recharging.

In summary, the AT&T Z221 is a feature phone that meets the basic communication needs of users who seek simplicity and reliability. With its compact design, functional features, and impressive battery life, the Z221 is an excellent choice for anyone looking for a straightforward mobile experience.
Top Page Image Contents