Verizon MIFI4510LPP manual Service Status Indicator LED States, Status Description

Page 10

Service Status Indicator (LED) States

LED Color			Status	Description

No Light			Off	The device is powered off or otherwise is not receiving power.
No Light			Off

Yellow			Solid	The device is in power down mode.
Yellow			Solid	The device is in power down mode.
			Blinking	The device is powered off and also charging the battery.

Green			Solid	The device is powered on; 4G LTE service is available but not
Green			Solid
				connected or connected while dormant.
			Blinking	The device is powered on and connected to the 4G LTE network
				and transmitting data.

Violet			Solid	The device is powered on; 3G 1X or EV-DO service is available but
Violet			Solid
				not connected or connected while dormant.
			Blinking	The device is powered on and connected to a 3G 1X or EV-DO
				network and transmitting data.

Red			Blinking	If this occurs during power up, no SIM Card is inserted. All other
Red			Blinking
				times, this indicates an error or a SIM Card failure.

White

Blinking	The device is powered on and the firmware is being upgraded.
	This LED only applies to over-the-air firmware updates.

5

Image 10

Contents User Guide Verizon Jetpack Mobile Hotspot MiFi4510LPatents and Licenses Software License Contents LAN Product Specifications and Regulatory Information GlossaryGetting Started Package Contents FeaturesOverview System Requirements Components ➋➋➌➌Service Status Indicator LED States Status DescriptionService Display States Display Icon StatusPower Management Caring for Your Device Using the MiFi 4510L 4G Mobile Broadband with LTE Accessing the NetworkWi-Fi 802.11b/g/n 3G Mobile Broadband with Evdo Rev. aUsing the Device for the First Time Install the 4G LTE SIM Card Assemble the Wall ChargerRemove the 4G LTE SIM Card Insert and Charge the Battery Page Remove the Battery Battery Tips Power On Power the MiFi 4510L On and OffPower Off Connecting to the MiFi Device Connect to MiFi SettingsNormal Use Using the Device After Setup is CompleteSetting up a Temporary Hotspot Security for the MiFi 4510LMiFi Settings Configuring MiFi Settings Login LoginMenu Bar Home Setup Wizard Page ➊➊ Check the Change Wi-Fi Settings check box Page Wi-Fi Wi-Fi Profiles Choosing a Profile Set up a Temporary Hotspot Changing to a Different Profile Updating Updating a Profile Not Currently in Use Buttons LAN TCP/IP Connected DevicesWwan Internet Connection Wwan Settings Admin Password SecuritySet Administration Password MAC Filter Trusted Client List Enable MAC FilterFind the MAC Address on a Computer Add Trusted Client MAC Address Buttons Remove a Device from the Trusted Client ListEnable Port Filtering See Enable Port Filtering on Port FilteringEnable Port Filtering Allowed Applications Custom Applications Port Ranges Advanced Settings Wi-Fi RouterSystem Config File Config File Download Config File Upload Diagnostics MiFi System InformationModem System Status Port Forwarding Port Forwarding Applications Power Automatic ShutdownLast Update Software UpdateUpdate Status HistoryTroubleshooting First Steps Common Problems and Solutions Page Customer Service Data Technical SupportProduct Specifications and Regulatory Information Technology/Bands Product SpecificationsGeneral EnvironmentalRF Exposure Content Regulatory StatementsWireless Communications Limited Warranty and LiabilitySafety Hazards Electrostatic discharge ESD Proper Battery Use and Disposal Important In event of a battery leakGlossary Glossary Bps Bits per second. The rate of data flow