White Paper J100
Service | Mode | Support |
|
|
|
CLOSE CHANNEL |
| No |
|
|
|
RECEIVE DATA |
| No |
|
|
|
SEND DATA |
| No |
|
|
|
GET CHANNEL STATUS |
| No |
|
|
|
User Interaction with SIM AT
Display text
Text of up to 240 characters (120 UCS coded) is supported.
Text clearing times are
•‘Long Back’ – Proactive session terminated by user.
•‘Back’ – Backward move in proactive session.
‘OK’/‘Back’/‘Long Back’ clears the display if the command is performed successfully.
‘Key’ responses:
•‘C’ clears current character.
•‘Long Back’ terminates the proactive session.
•‘Back’ – Backward move in proactive session.
•‘OK’ – Command performed successfully.
Select item
Scroll to highlight item for selection. ‘Key’ responses:
•Navigational key press down – Scroll down list.
•Navigational key press up – Scroll up list.
•Long ‘Back’ terminates proactive session.
•‘Back’ – Backward move in proactive session.
•‘OK’– Command performed successfully.
Get inkey
Prompt for a
•‘C’ clears current character.
•‘Long Back’ terminates the proactive session.
•‘Back’ – Backward move in proactive session.
•‘OK’ – Command performed successfully.
Send short message
Default message “Sending message, please wait” can be replaced for the Alpha Identifier text, or sup- pressed completely if a null text is provided. Default responses are “MESSAGE FAILED” or “MESSAGE SENT”. ‘Key’ responses:
•Long ‘Back’ or ‘Back’ ends the proactive ses- sion.
Get input
Prompt for character input. The phone will refuse to accept further input when maximum response length is exceeded. UI Maximum Response lengths:
•Digits Only – 160 characters.
•SMS default alphabet characters – 160 charac- ters.
•Hidden Characters (digits only) – 20 characters.
Set up menu
Incorporates a SIM Application Toolkit Menu Item into J100 main menu structure.
If an Alpha Identifier is supplied in the Set Up Menu command, this is used as the SIM AT entry in J100 main menu. If no alpha identifier is supplied and several items are found in the menu, a default title is used. If the SIM AT Menu Item is selected by pressing ‘Select’, all the items sent in the Set Up Menu command will be available for selection, in the same way as the Select Item command.
17 | February 2006 |