Pelco C3422M-B manual Specifications, General, ELECTRICAL Dome Drive Only

Specifications

GENERAL

Construction
Back Box	316L stainless steel
Dome Drive	Aluminum, thermoplastic
Lower Dome Trim Ring	316L stainless steel
Bubble	Polycarbonate, 0.09-inch thick
V-Band	316L stainless steel
Pressure Relief	Brass
Schrader Valve	Brass
Connector	Nickel-plated steel
Light Attenuation
Smoked	f/1.0 light loss
Clear	Zero light loss
Pressurization
Valve	Schrader
Pressure	8 psig (not factory pressurized)
Pressure Relief	10 psig
Pan Movement	360° continuous pan rotation
Vertical Tilt	+2° to -92°
Manual Pan/Tilt Speeds*
Pan	0.1° to 80°/sec manual operation, 150°/sec turbo
Tilt	0.1° to 40°/sec manual operation
Preset Speeds
Pan	400°/sec
Tilt	200°/sec
Operating Temperature	(Assumes no wind chill factor)
Maximum	140°F (60°C) absolute maximum; 122°F (50°C) sustained maximum
Minimum	-60°F (-51.1°C) absolute minimum; minimal icing at sustained minimum of -50°F
	(-45°C); prevents icing at sustained minimum of -40°F (-40°C); de-ices 0.1 inch
	(2.5 mm) within 3 hours after power-up
Weight (approximate)
Back Box	10.2 lb (4.60 kg)
Dome Drive	3.3 lb (1.48 kg)
Lower Dome	3.3 lb (1.48 kg)

ELECTRICAL (Dome Drive Only)

Input Voltage	18-32	VAC; 24 VAC nominal
	22-27	VDC; 24 VDC nominal

*For variable-speed operation, an appropriate controller is required. With fixed-speed controllers, pan/tilt speed is 20°/sec. The CM6700/CM6800 controller with the KBD200A keyboard has programmable fixed speeds.

C3422M-B (3/08) 17