White Paper Z300
Service | Mode | Support in |
|
| Z300 |
|
|
|
| '05' = set up call, disconnecting all other calls (if any), | Yes |
| with redial |
|
|
|
|
SET UP IDLE MODE |
| No |
|
|
|
SET UP MENU |
| Yes |
|
|
|
SMS PP DOWNLOAD |
| Yes |
|
|
|
User interaction with SIM AT
Display text
Text of up to 240 characters (120 UCS2 coded) is supported.
Text clearing times are
‘Key’ responses:
•‘Long NO’ – Proactive session terminated by user.
•‘NO’ – Backward move in proactive session.
•Any other key clears display if the command is performed successfully.
Get inkey
Prompt for a
‘Key’ responses:
•‘CLR’ clears current character.
•‘Long NO’ terminates the proactive session.
•‘NO’ – Backward move in proactive session.
•‘YES’ – Command performed successfully.
Get input
Prompt for character input. Pressing ‘YES’ without entering a character gives warning message “Minimum ‘no.’ characters”. The phone will refuse to accept further input when the maximum response length is exceeded.
MMI Maximum Response lengths:
•Digits Only – 160 characters
•SMS default alphabet characters – 160 charac- ters
•Hidden Characters (digits only) – 11 characters
‘Key’ responses:
•‘CLR’ clears current character/characters.
•‘Long NO’ terminates the proactive session.
•‘NO’ – Backward move in proactive session.
•‘YES’ – Command performed successfully.
Refresh
When a Refresh - SIM Reset command is ececuted by the phone, it displays the message “Please wait” and then restarts.
Select item
Scroll to highlight item for selection. The maximum number of items supported by the phone within one Select Item command is 30.
‘Key’ responses:
•Down arrow – Scroll down list.
•Up arrow – Scroll up list.
•Long ‘NO’ terminates proactive session.
•‘NO’ – Backward move in proactive session.
•‘YES’ – Command performed successfully.
Send short message
Default message “Sending message, please wait” can be replaced by the Alpha Identifier text, or sup- pressed completely if a null text is provided. Responses are “MESSAGE FAILED” or “MESSAGE SENT”.
‘Key’ responses:
•Long ‘NO’ or ‘NO’ terminates the proactive ses- sion.
Set up call
If the ME is on a call when the command 'Set up Call, putting all other calls on hold' is sent, the user sees the text 'Setting up a call current call will be held'.
47 | October 2005 |