Sony Ericsson T630, T628 manual WAP Operator technical data, WAP Provisioning, Security mechanism

White Paper T630/T628

WAP Operator technical data

Feature	Support in the T630/T628 for WAP
WAP Browser
Version	2.0 baseline
HTML	XHTML, mobile profile
WAP Provisioning
Total Parameter sets	5
Parameter set list	Name
	Startpage
	IP settings:

CSD phone no., CSD Data rate, CSD dial type

GPRS APN, password request, allow calls, authentication, data compression, header compression, quality of services

	IP address, datamode
	UserId and password
	Security on/off
	Show images on/off
	Response timer
Manual selection	Yes, between Analog (V32) and Digital (V110)
Parameter sets include	WAP/CSD, WAP/GPRS (different sets)
Factory pre-configuration	WAP/CSD (possibility to lock a setting), WAP/GPRS
OTA	WAP/CSD, WAP/GPRS configuration possible
Simultaneous OTA	WAP/CSD, WAP/GPRS configuration possible
Single OTA	WAP/CSD, WAP/GPRS is not possible
Bookmarks	Not empty by default
URL format	Underlined
Security mechanism
OTA provisioning (if empty)	Operator verification through a code, included in the OTA data.
	This code is shown to the user who can choose installation or
	not.
Interface (if empty)	An Install question is asked with the code, if available.
	The user has to choose if a new WAP profile shall be created or
	an existing profile shall be replaced.
Re-provisioning (Set 1 filled)	As above
Interface (Set 1 filled)	As above
Carrier reset/provisioning	Yes, but not if the set is pre-configured in the factory and locked.

72 October 2003