Programmed Play

Programmed play can only be achieved in Stop mode.

1.In stop mode, briefly press the MODE button (14) on the unit. Program Channel No. ‘P1’ will briefly appear. ‘P’ will then disappear leaving the Program Indicator,‘PROG’ and ‘1’ flash in the Display to prompt for input.

2.Press the or Buttons (4, 5) to select your desired track to be stored in the program. For example the first selection is track no.5.

3.Press the MODE button (14) to confirmed when track No.5 flashed in the Display.

	The first program selection is now stored in the program memory.
	The Program Channel No. ‘P 2’ will appear briefly. ‘P’ will disappear and 2 will
	revert to 5, i.e. the first selected program and flash together with ‘PROG’ to
	prompt for another input.
4.	Repeat points 2 and 3 to enter the desired tracks up to max 32 selections.
5.	Press the	button once to start playback in your programmed sequence.

6.To clear the program memory, while playing press the Stop button 2 times or select TUNER, PHONO function or turn the Syatem off.

COPYING FILES BETWEEN USB AND CARD

The files stored on your USB flash drive or on the SD/MMC card can be copied to each other. Please follow the instructions below to copy the files between the USB port and the Card slot.

1.Insert your USB flash drive into the USB PORT (22) and the SD/MMC Memory Card into the SD/MMC Slot (20).

2.Select the USB / CARD function mode by setting the Function selector (12) to “USB/CARD”. . The total number of tracks on the USB will be displayed and playback will automatically start from the first track.

3.Press the STOP/USB/SD Button once to stop the playback. Copy of the USB files to the Card is now ready to proceed any time. If you want to copy the files from the Card to the USB, you need to enter the Card playback Stop mode first then proceed to Step 4 below for copying.

USB Playback Stop Mode

Card Playback Stop Mode