Siemens A56, S56, CT56 manual

Page 9

Warning Alerts

FastForward provides visual and audio warnings to alert you to conditions requiring your attention.

The ! indicator on the front provides visual warning while an internal speaker provides audio indications.

14

The FastForward device will rapidly flash the ! indicator and sound a high-low alert for 3 seconds if the wireless phone is removed without pressing the Cancel button. This alerts you that the phone is still call forwarded. Simply replace the phone in the device, press the Cancel button, and the Forward indicator will extinguish, indicating that call forwarding is deactivated and you may remove the wireless phone.

• The FastForward device will slowly flash the

!

indicator and

 

 

sound a low alert for 5 seconds if there is no Cf1, Cf2, or Cf3 programmed into the wireless phone’s address book – verify the Cf programming of the wireless phone and verify the position of the Cf switch on the bottom of the device.

• The FastForward device will flash the

!

indicator in an “On, On,

 

 

Off” pattern and sound a high alert for 5 seconds if there is an issue with the device communicating with the wireless phone or the wireless network – verify that the wireless phone is turned on, there is good coverage, there is not an active call, and try re-inserting the wireless phone.

15

Image 9
Contents FastForward User Guide Welcome Siemens Phones SupportedThat’s it! Your FastForward is now ready for use Quick StartFeatures ContentsSetting Up Your Siemens Wireless Phone Using FastForwardSetting Up a 2nd FastForward Setting Up Your Siemens Wireless Phone cont’dSetting Up a 2nd FastForward cont’d Canceling Call Forwarding From Your Wireless Phone Making Wireless Calls While Call ForwardedPage Frequently Asked Questions Additional Support One -Year Limited Warranty