Multiplexer User's Guide
Confidential / Released
s
mobile
0 Document history
This chapter reports modifications and improvements over previous versions of this document.
Preceding document: “Multiplexer User's Guide” Version 05
New document: “Multiplexer User's Guide” Version 06
Chapter | What is new |
|
|
1.1Added further supported products.
3.1.1Added note about closing Multiplexer.
3.1.2Added note about maximum frame size N1.
4.2.4Second byte for frame size greater than 127 bytes is not supported.
4.3.5Corrected description of
5Corrected description of multiplexer version control.
5.3.3Corrected example.
Preceding document: “Multiplexer User's Guide” Version 04
New document: “Multiplexer User's Guide” Version 05
Chapter | What is new |
|
|
1.1Added further supported products.
3.1.4Modified remark on AT&W.
3.1.6Added chapter “Operation of a second physical serial interface ASC1 (if applicable)”
Preceding document: “Multiplexer User's Guide” Version 03
New document: “Multiplexer User's Guide” Version 04
Chapter | What is new |
|
|
1.1Added further supported products.
3 - 3.4 Restructured and revised all chapters.
3.1.2, 3.3, To control SLEEP mode use PSC messages rather than entering AT+CFUN=<n> 4.3.10
Mux_guide_v06 | Page 5 of 36 | 30.06.2004 |