Chapter 4
Reference
Troubleshooting
Video is unstable or only black and white.
•Check that you are using the correct broadcast standard format.
•Check the quality of the incoming TV signal on another receiver.
•Connect your tuner directly to the cable TV or antenna source. Splitters can degrade the signal.
No video or audio.
•Check that the AC power adapter connected to your TV Wonder™ 650 is the model
•If the LED indicator on the front of the device is not lit, check the cabling to make sure the device is receiving power. If the device has been running for a lengthy period of time, disconnect it to let it cool, then reconnect and check that the LED light is on.
•Check that the speakers are connected and turned on.
•Check that your system's sound device is working properly (Control Panel ▷ Sounds and Audio Devices).
•Make sure the monitor is plugged in, turned on, and connected to the computer.
•Make sure the cable or antenna is connected.
•Check that all connectors are securely plugged in to the correct jacks.
•Check that the tuner is securely connected.
Recording stops unexpectedly.
•Make you have sufficient disk space to accommodate the recording.
•Make sure you are recording to the correct hard disk. Check your software manual for instructions on determining the target drive and folder for your recordings.
•The maximum file size for the FAT32 file system is 4 gigabytes.
•Disable screen savers while recording.
•Disable Power Management while recording.