Toshiba 6100 manual Membrane Switch Removal, Speakers Removal

FIELD REPLACEABLE UNIT DOCUMENTATION

TM

Satellite Pro

6100 Series

SYSTEM BOARD REMOVAL

PJ8800

System board

DC-IN jack harness

Heat sink Plate assy

SDcable Sound cable M2.5x4 black flat head screws

3.Disconnect following cables from the system board:

-Sound interface cable from PJ302 -SD interface cable from PJ365 -DC-IN jack harness from PJ8800

4.Remove four M2.5x4 black flat head screws securing the system board.

5.Lift out the system board.

6. Remove the video chip heat sink plate assembly from the system board.

NOTE: When re-installing the heat sink plate assembly, make sure that a 0.2g silicone grease is applied to the video controller IC(IC11).

MEMBRANE SWITCH REMOVAL			SPEAKERS REMOVAL
	Membrane	Left and right
	switch assy	speakers

M2.5x4 black flat head screws

1.Remove three M2.5x4 black flat head screws securing the membrane switch.

2.Lift out the membrane switch assembly.

M2.5x4 black flat head screws

1.Remove two M2.5x4 black flat head screws securing the left and right speakers.

TOSHIBA

Tough Enough for Today’s World.